SHURTAPE TECHNOLOGIES, INC.
SHURTAPE TECHNOLOGIES, INC. 201153 Duct Tape Red 60 1/8 yd 1 7/8 in electrician tool
Red general-purpose duct tape with rubber adhesive on polyethylene-coated cloth, 60 1/8 yards long by 1 7/8 inches wide, 12.5 mil thick, adhering at 54 oz/in and rated to 200 °F
- Strong 54 oz/in adhesion holds fast on steel
- Rubber adhesive bonds reliably indoors or outdoors
- Withstands heat up to 200 °F without failure
- 5 mil thick polyethylene cloth resists tears
- 60 yd roll covers large jobs in one go
Red Duct Tape for Electrical Work
This Shurtape PC 622 duct tape comes in a red polyethylene-coated cloth roll measuring 60 1/8 yards long by 1-7/8 inches wide. It uses a rubber adhesive that delivers 54 oz/in adhesion to steel and is rated for continuous temperatures up to 200 degrees Fahrenheit. The tape is built for indoor and outdoor construction, maintenance and repair tasks.
Suits General Repair and Bundling Needs
Electricians and maintenance crews who need a strong, weather-resistant tape for sealing, bundling, holding and patching will find this roll practical. It is not designed for clean removal, so users who require a tape that leaves no residue on finished surfaces should look at a different product. The general-purpose construction also means it is not rated for specialised high-voltage insulation or plenum applications.
Check Surface and Temperature Compatibility
Before ordering, verify that the 12.5 mil thickness and 1-7/8 inch width fit the gaps, conduits or bundles you plan to wrap. Confirm the maximum operating temperature of 200 degrees Fahrenheit covers the environment where the tape will be applied. Ensure the rubber adhesive is compatible with the specific metals, plastics or insulation materials in your project.
Highlights
- Strong 54 oz/in adhesion holds fast on steel
- Rubber adhesive bonds reliably indoors or outdoors
- Withstands heat up to 200 °F without failure
- 5 mil thick polyethylene cloth resists tears
- 60 yd roll covers large jobs in one go
Specifications
| Brand | SHURTAPE |
|---|
Questions about this item
What surface should I have ready for the 54 oz/in adhesion to grip properly?
The tape bonds to steel, polyethylene coated cloth and similar clean, dry surfaces; remove dust, oil or moisture before applying the 1 7/8 in wide roll.
Will the rubber adhesive stay flexible if I run it beside a 200 Degrees F heat source?
The tape is rated for a maximum performance temperature of 200 Degrees F, so it remains pliable and holds near that level of heat.
How can I confirm the 12.5 mil thickness is consistent after I unroll a section?
Measure a flat strip with a caliper or micrometer; a uniform reading of 12.5 mil across the width shows the backing and adhesive are intact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
