We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black CPU air cooler with dual 120mm ARGB fans and seven heat pipes

Shuole

Shuole Phantom Spirit120 SE ARGB laptop cooling pad

SKU CH-D31Z-B8CX9

A CPU air cooler with seven heat pipes, dual 120 mm PWM fans and 5 V ARGB lighting for Intel and AMD sockets

  • ColorBlack
  • Features?AGHP technique?7x6mm heatpipe with AGHP upgraded 4th genera
  • AGHP 4.0 heat pipes counter gravity in any orientation
  • Dual 120 mm PWM fans push 66.17 CFM at 25.6 dB(A)
  • 5 V 3-pin ARGB lighting syncs with motherboard software
  • Supports Intel LGA 1700/1851/1200/115x and AMD AM4/AM5
  • 154 mm height fits most mid-tower cases

Phantom Spirit120 SE ARGB CPU Cooler

The Phantom Spirit120 SE ARGB is a dual-fan tower air cooler designed for desktop processors. It fits Intel LGA1700, LGA1851, LGA1200, LGA1150, LGA1151, LGA1155 and LGA1156 sockets plus AMD AM4 and AM5 platforms. Builders receive mounting hardware for every listed socket. The black anodised aluminium fin stack and copper base clear most memory modules.

Sustained-load behaviour

Seven 6 mm heat pipes use AGHP 4.0 technology to counter the inverse-gravity effect when the cooler is mounted vertically or horizontally. Two 120 mm TL-C12B-S V2 PWM fans spin at 1500 rpm ±10 % and push 66.17 CFM each at a maximum of 25.6 dB(A). S-FDB bearings are rated for 20000 hours of industrial service life.

Pre-installation checks

Verify that your case allows at least 154 mm of cooler height and 135 mm of width. The cooler measures 125 mm long, 135 mm wide and 154 mm tall. Ensure the motherboard layout leaves room for the dual 120x120x25 mm fans and 5 V 3-pin ARGB headers. Confirm your CPU socket appears in the supported list above.

Highlights

  • AGHP 4.0 heat pipes counter gravity in any orientation
  • Dual 120 mm PWM fans push 66.17 CFM at 25.6 dB(A)
  • 5 V 3-pin ARGB lighting syncs with motherboard software
  • Supports Intel LGA 1700/1851/1200/115x and AMD AM4/AM5
  • 154 mm height fits most mid-tower cases

Specifications

ColorBlack
Features?AGHP technique?7x6mm heatpipe with AGHP upgraded 4th generation technology, the Inverse gravity effect caused by vertical / horizontal orientation.Up to 20000 hours of industrial service life, S-FDB bearings ensure long service life of air-cooler radiators. UL class a safety insulation low-grade, industrial strength PBT + PC material to create high-quality products for you. The height is 154mm, compatible with a wide range of chassis models.
?Double PWM Fans? TL-C12B-S V2; The light connections are 5V 3pin ARGB.Standard size industrial grade PWM performance PC fan: 120x120x25mm (4.9

Questions about this item

How loud are the dual 120 mm TL-C12B-S V2 fans at full 1500 rpm when the cooler runs all day?

The fans are rated at 25.6 dB(A) at maximum speed, so even under sustained load the noise stays at a low whisper level.

Which motherboard socket and mounting hardware must I already have to install this Phantom Spirit120 SE ARGB?

You need an Intel LGA 1700, 1851, 1200, 1150, 1151, 1155 or 1156 socket, or an AMD AM4 or AM5 socket; the box includes the matching mounting plates and fasteners for each platform.

Will the 154 mm tall cooler clear the memory slots on an older LGA 1150 or AM4 board I plan to keep?

The design avoids the memory area, so standard-height DIMMs fit underneath the 125 mm deep fin stack without interference on those legacy platforms.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.