We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 8-metre USB 3.1 Type-C cable with dual screw-lock connectors to USB 3.0 Type-A

Shenzhen Shenzhong TECH. CO. LTD.

Shenzhen Shenzhong TECH. CO. LTD. USB 3.1 Type-C Dual Screws Locking to USB 3.0 Cable 800cm

SKU CH-P669-SAC1J

An 800 cm USB 3.1 Type-C cable with dual locking screws for secure camera or recorder connections

  • Connector TypeUSB A to USB B
  • 800 cm reach for distant camera placement
  • Dual screw locking secures connection against vibration
  • Repeater chipset maintains signal integrity over length
  • USB 3.1 Type-C reversible plug eases insertion
  • USB 3.0 Type-A compatibility with existing ports

8-Metre Locking USB Cable for Industrial Cameras

This 800 cm USB 3.1 Type-C to USB 3.0 cable uses dual locking screws on the Type-C end to prevent accidental disconnection. It targets machine-vision cameras, recorders and other panel-mounted devices that need a secure link over long distances. The reversible Type-C plug simplifies insertion in tight enclosures.

Integrated Repeater Manages Signal and Power

A built-in repeater chipset maintains USB 3.0 data integrity across the full 800 cm run without external power. The cable draws bus power normally and adds no audible noise because it has no moving parts. Thermals remain negligible during continuous high-throughput transfers.

Mounting Hardware Replaces Ad-Hoc Strain Relief

The panel-mount screws turn the connector into a fixed bulkhead fitting, eliminating cable tug on the camera port. No driver discs or configuration utilities are bundled; the cable enumerates as a standard USB 3.0 link on any host.

Highlights

  • 800 cm reach for distant camera placement
  • Dual screw locking secures connection against vibration
  • Repeater chipset maintains signal integrity over length
  • USB 3.1 Type-C reversible plug eases insertion
  • USB 3.0 Type-A compatibility with existing ports

Specifications

Connector TypeUSB A to USB B

Questions about this item

How do I install the USB Type-C end with its dual locking screws on a camera recorder panel?

Align the Type-C connector with the panel cut-out, insert it fully, then tighten both mounting screws by hand until snug; the reversible Type-C design means orientation does not matter.

What part of this 800 cm cable is most likely to need replacement after long-term use?

The built-in repeater chipset inside the cable assembly is the active component that can degrade over time, while the passive wiring and locking connectors are rated for the cable’s full length.

What is the first limitation I will hit when running this cable at its full 800 cm length under continuous high-speed transfer?

The USB 3.1 Gen 1 signalling rate of 5 Gb/s is the bottleneck; the integrated repeater chipset maintains signal integrity over the 800 cm run but cannot exceed the standard’s maximum throughput.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.