We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 70cm cable with two black 36-pin SFF-8087 connectors at each end

Shenzhen Shenzhong TECH. CO. LTD.

Shenzhen Shenzhong TECH. CO. LTD. Internal Mini SAS 36Pin SFF-8087 to Mini SAS 36Pin SFF-8087 Cable 70cm

SKU CH-Y9K4-0XVH5

Connects SAS or SATA controllers to backplanes using 36-pin SFF-8087 links over a 70cm length with positive latching

  • Connector TypeUSB A to USB B
  • 70cm length fits tight server chassis
  • 36-pin SFF-8087 connectors link controller to backplane
  • Positive passive latching keeps plugs securely mated
  • Supports SAS and SATA generation I and II bandwidths
  • Designed for internal RAID hard-disk data connections

Internal Mini SAS Cable 70cm

This 70cm internal cable connects two Mini SAS 36-pin SFF-8087 ports for server hard-disk RAID arrays. It is built for controller-to-backplane links inside a chassis. The positive and passive latching keeps each plug firmly mated to its receptacle. System builders who need a short, secure internal SAS link will find it fits the role.

SAS SATA Generation I II Bandwidth Limit

The assembly supports SAS and SATA generation I and II bandwidths and no higher. That ceiling caps the maximum throughput for any drive attached through this cable. Installations that require generation III or faster signalling cannot use this part. Buyers who need more bandwidth must select a different cable.

36 Pin SFF-8087 Connector Match

Both ends carry a 36-pin SFF-8087 Mini SAS connector, so the cable only works when the controller and the backplane each present that exact interface. A mismatched port type will prevent connection entirely. Buyers who need a different pin count or form factor cannot use this cable.

Highlights

  • 70cm length fits tight server chassis
  • 36-pin SFF-8087 connectors link controller to backplane
  • Positive passive latching keeps plugs securely mated
  • Supports SAS and SATA generation I and II bandwidths
  • Designed for internal RAID hard-disk data connections

Specifications

Connector TypeUSB A to USB B

Questions about this item

Should I pick a different length or connector for my server backplane?

This cable is 70 cm long with SFF-8087 36-pin Mini SAS connectors on both ends, designed for controller-to-backplane links.

What real-world throughput will I see from the SAS/SATA Gen I and II rating?

The assembly supports SAS and SATA first- and second-generation bandwidths, so actual speed depends on the drives and controller you connect.

Does the SFF-8087 interface limit me to a specific SAS or SATA generation?

The SFF-8087 connector carries SAS and SATA Gen I and II signals; it does not support newer generations beyond that.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.