Shenzhen Lepower Electronics Co., Ltd
Shenzhen Lepower Electronics Co., Ltd EBL-802 Battery Charger AA AAA 9V Ni-MH Ni-Cd
Charges two or four AA/AAA and one or two 9V Ni-MH/Ni-Cd cells with MCU-controlled pulse charging and global voltage input
- TypeChargers
- PartsOne year
- LaborOne year
- Charges 2 or 4 AA and AAA Ni-MH Ni-Cd cells
- Charges 1 or 2 9V Ni-MH Ni-Cd batteries
- MCU controlled pulse charging prevents over-charge and over-heat
- Works on 100 to 240V AC worldwide input
- Outputs 2.4V at 600-670mA for AA AAA and 250mA for 9V
EBL-802 charger for AA AAA and 9V cells
The EBL-802 charges two or four AA or AAA Ni-MH and Ni-Cd batteries at once, and also handles one or two 9V Ni-MH or Ni-Cd cells. An MCU controls the process with negative delta V pulse charging to stop over-charge, over-discharge, over-current and over-heat. It accepts 100 to 240 V AC input for worldwide use. Batteries are not included.
Capacity and headroom
AA and AAA slots deliver 2.4 V at 600 to 670 mA, while 9V channels taper from 250 mA at 6 to 7 V down to 30 mA at 9.6 V. Saturation charging rate exceeds 80 percent, so cells reach usable capacity quickly. The charger cannot revive absolute 0 V batteries and must not be used with alkaline or carbon types.
MCU controlled negative delta V pulse charging
The microcontroller-driven negative delta V pulse method actively prevents over-charge, over-discharge, over-current and over-heat during every cycle. This single safety architecture decides whether the charger suits cells that need precise termination. Buyers needing to charge lithium-ion, LiFePO4 or other chemistries must choose a different unit.
Highlights
- Charges 2 or 4 AA and AAA Ni-MH Ni-Cd cells
- Charges 1 or 2 9V Ni-MH Ni-Cd batteries
- MCU controlled pulse charging prevents over-charge and over-heat
- Works on 100 to 240V AC worldwide input
- Outputs 2.4V at 600-670mA for AA AAA and 250mA for 9V
Specifications
| Type | Chargers |
|---|---|
| Parts | One year |
| Labor | One year |
Questions about this item
Will the EBL-802 charger work with the 9V Ni-MH batteries I already own?
Yes, the EBL-802 charges 1 or 2 pieces of 9V Ni-MH or Ni-Cd batteries using a pulse charging method that switches from 250 mA to 140 mA at 8.4 V and 30 mA at 9.6 V.
How can I verify the EBL-802 is charging my AA batteries correctly after plugging it in?
The charger uses MCU control with -ΔV pulse technology to stop automatically when AA or AAA cells reach saturation above 80 %, preventing over-charge, over-discharge, over-current and over-heat.
Does the EBL-802 package include any AA or AAA rechargeable cells, or must I buy them separately?
The box contains only the EBL-802 charger unit; batteries are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
