We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C to USB-C panel-mount cable with dual M2 screw-locking connectors, 1.2m length

SHENZHEN JIMIER ELECTRONICS CO,. LTD.

SHENZHEN JIMIER USB 3.1 Type-C Dual M2 Screw Locking 10Gbps 1.2m Panel Mount Cable

SKU CH-Q5A5-Z4190

USB 3.1 Type-C cable with dual M2 screw locking for secure 10 Gbps data transfer over 1.2 m

  • Connector TypeUSB C to USB C
  • ColorBlack

Cable Length 1.2M

  • 1.2M
  • 2.0M
  • 3.0M

Struck-through versions exist but are not stocked here.

  • Secure lock with dual M2.0 screws prevents accidental disconnection
  • 10 Gbps data rate moves large files quickly
  • 2 m length gives flexible panel mounting options
  • Reversible USB-C plugs insert either way up
  • Industrial-grade locking design withstands vibration and shock

Secure USB-C Connection for Industrial Use

This 1.2m USB 3.1 Type-C cable features dual M2.0 screw-locking connectors on both ends for panel-mount installation. The locking mechanism prevents accidental disconnection in vibration-prone environments. It supports 10Gbps data transfer rates suitable for high-speed peripheral links. The reversible USB-C plugs simplify orientation during maintenance.

Passive Cable Thermals and Power

As a passive copper assembly, the cable generates no measurable heat during normal operation and requires no active cooling. It draws power only from the connected host or device for signal integrity, adding negligible load to the USB power budget. No fan noise or thermal throttling considerations apply to this component. The 10Gbps signalling remains stable within standard USB 3.1 voltage limits.

Panel-Mount Integration Requirements

Each end needs a panel cut-out threaded for M2.0 screws to secure the locking flange. The 1.2m length suits internal chassis routing or short external runs between rack-mounted equipment. It frees up standard USB ports by dedicating a locked link for critical devices. Installers must verify panel thickness compatibility with the supplied screw length.

Highlights

  • Secure lock with dual M2.0 screws prevents accidental disconnection
  • 10 Gbps data rate moves large files quickly
  • 2 m length gives flexible panel mounting options
  • Reversible USB-C plugs insert either way up
  • Industrial-grade locking design withstands vibration and shock

Specifications

Connector TypeUSB C to USB C
ColorBlack

Questions about this item

How do I install the panel-mount end with the M2.0 locking screws?

Insert the connector through the panel cut-out and thread the two M2.0 screws into the matching holes, tightening them evenly so the flange sits flush.

What maintenance will the dual screw-locking connectors need over time?

Periodically check that both M2.0 screws remain snug and clean any dust from the USB-C contacts with compressed air.

What is the first limit reached during sustained 10 Gbps transfers over the 1.2 m length?

Signal integrity at the USB 3.1 Gen 2 rate is the limiting factor; the 1.2 m cable is rated for that speed, so thermal or protocol overhead will appear before a length issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.