We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 A to Micro USB 3.0 B cable with mounting screws on Micro B end

SHENZHEN JIMIER ELECTRONICS CO,. LTD.

SHENZHEN JIMIER USB 3.0 A to Micro USB 3.0 B Cable 1.2m with Mount Screws

SKU CH-9GX7-S55HJ

A 1.2m USB 3.0 cable with Micro B mount screws for secure hard-disk or phone connections at up to 4.8Gbps

  • Connector TypeMicro USB to USB A
  • ColorBlack

Cable Length 1.2M

  • 1.2M
  • 3.0M
  • 5.0M
  • 8.0M

Struck-through versions exist but are not stocked here.

  • Transfers data at up to 4.8 Gbps with USB 3.0 host and device
  • Ten times faster than USB 2.0 at 480 Mbps
  • Works with USB 2.0 and 1.1 ports for broad compatibility
  • Micro B connector includes two M2 mount screws for secure panel mounting
  • 2 m length gives flexible reach for hard drives and phones

USB 3.0 A to Micro-B Cable with Panel Mount

This 1.2 metre cable connects a USB 3.0 Type-A host to devices fitted with a Micro-B 3.0 port. The Micro-B plug includes two M2 mounting screws so the connector can be secured to a chassis or bracket. It is suited to external hard drives, docks or industrial equipment that need a fixed, vibration-resistant link.

Fixed Connector Frees Port Strain

The panel-mount screws anchor the Micro-B end to the device enclosure, removing tug stress from the port itself. No additional brackets or adhesives are required. The cable carries both data and power, so a separate supply is not needed for bus-powered drives. It works with any USB 3.0 host controller and falls back to USB 2.0 or 1.1 speeds when plugged into older ports.

For Builds Needing a Secured Micro-B Link

Buyers who need a lockable Micro-B 3.0 connection for rack trays, kiosks or mobile racks will find the M2 screws convenient. It does not suit devices that use USB-C, Mini-B or standard Micro-B 2.0 connectors. Anyone requiring lengths beyond 1.2 metres should select a different cable.

Highlights

  • Transfers data at up to 4.8 Gbps with USB 3.0 host and device
  • Ten times faster than USB 2.0 at 480 Mbps
  • Works with USB 2.0 and 1.1 ports for broad compatibility
  • Micro B connector includes two M2 mount screws for secure panel mounting
  • 2 m length gives flexible reach for hard drives and phones

Specifications

Connector TypeMicro USB to USB A
ColorBlack

Questions about this item

Will the 4.8 Gbps throughput hold up during long transfers or does the 1.2 m length introduce a bottleneck?

The cable is rated for up to 4.8 Gbps with a USB 3.0 host and device; the 1.2 m length meets the USB 3.0 specification so sustained speed is limited by the connected hardware, not the cable.

Does the cable or its connectors get hot when running at full 4.8 Gbps all day?

USB 3.0 cables carry only signal and low power, so the cable itself stays at ambient temperature even during continuous maximum-throughput transfers.

What port must my external drive already have for the Micro B end with M2 mount screws to fit?

The drive needs a USB 3.0 Micro B receptacle with the standard two M2 mounting holes that match the cable's screw spacing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.