Sharp
Sharp XV-Z3000 DLP Replacement Lamp & Housing 275W 0.9900 kg
Replacement lamp and housing for Sharp XV-Z3000 projector rated 275W with 2000-hour full-power life and 3000-hour eco-mode life
- TypeProject Lamp
- Weight0.9900
- Genuine 275W AL Series lamp delivers 2,000 hours full-power brightness
- Eco-mode extends usable life to 3,000 hours for lower running cost
- Pre-assembled lamp and housing fits Sharp XV-Z3000 without extra tools
- New aftermarket module weighs 0.9900 kg for secure mounting
- 90-day warranty covers the replacement from day one
Sharp XV-Z3000 Lamp & Housing
This aftermarket lamp and housing assembly is built for the Sharp XV-Z3000 projector. It uses a 275W AL Series lamp rated for 2,000 hours at full power and 3,000 hours in eco-mode. The module weighs .9900 kg and ships new with a 90 day warranty.
Suits owners needing a direct replacement
The unit fits the Sharp XV-Z3000 exactly, so owners of other projector models should look elsewhere. Buyers who want an original manufacturer bulb installed instead of the AL Series lamp will need a different SKU.
Simple swap with standard precautions
Installation follows the projector's normal lamp-replacement procedure; no special tools are required. The most common issue is forgetting to reset the lamp-hour counter after fitting the new module, which leaves the replacement warning active.
Highlights
- Genuine 275W AL Series lamp delivers 2,000 hours full-power brightness
- Eco-mode extends usable life to 3,000 hours for lower running cost
- Pre-assembled lamp and housing fits Sharp XV-Z3000 without extra tools
- New aftermarket module weighs 0.9900 kg for secure mounting
- 90-day warranty covers the replacement from day one
Specifications
| Brand | Advanced Lamps |
|---|---|
| Model | XV-Z3000-LAMP-A |
| Part Number | XV-Z3000-LAMP-A |
| Type | Project Lamp |
| Weight | 0.9900 |
Questions about this item
Does the Sharp XV-Z3000 projector need to be installed and working before I fit this 275 W lamp module?
Yes. The lamp and housing is a replacement part designed for the Sharp XV-Z3000 projector, so the projector itself must already be in place for the module to function.
If I keep using the original air filter and colour wheel, will this 275 W lamp run at its rated 2 000 hours in full power mode?
The lamp is rated for 2 000 hours at full power and 3 000 hours in eco mode; maintaining the projector's original filters and cooling helps achieve those figures.
After fitting the lamp, how do I confirm the projector recognises the new 275 W module and resets the hour counter?
Power on the XV-Z3000, open the on-screen menu and check the lamp-hour readout — it should show zero or near-zero hours, confirming the new module is detected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



