We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp XG-PH50NL projector lamp module with housing

Sharp

Sharp XG-PH50NL projector lamp 250W

SKU CH-58WR-8NP1X

A 250W DLP projector lamp module with 2,000 to 3,000 hour life, supplied fully assembled for direct installation

  • TypeProject Lamp
  • Wattage250W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Genuine replacement lamp restores full brightness
  • 250 W DLP bulb delivers reliable light output
  • Up to 3,000 hours life in economy mode
  • Ready-to-install module with housing included
  • Manufactured to ISO 9001 quality standards

Ready-to-install lamp module

This Sharp XG-PH50NL replacement lamp ships as a complete 250W bulb-and-housing assembly for immediate installation in compatible Sharp projectors. The module is manufactured to ISO9001 quality standards and undergoes checks for beam performance, ignition, voltage and run-time before it reaches you. It replaces the original ANPH50LP1 part without requiring separate bulb handling or alignment.

Rated output and economy mode

The 250W lamp delivers 2000 hours of operation in normal mode and extends to 3000 hours when the projector runs in economy mode. Power draw and thermal output remain consistent with the factory specification, so existing cooling and power circuits handle the module without modification. Acoustic performance matches the original lamp design because the housing and bulb geometry are unchanged.

Direct replacement for worn originals

This unit restores brightness and colour accuracy when the factory lamp reaches its rated life or shows dimming, flicker or ignition failure. It is not suited for users who need higher lumen output than the original 250W design provides or for projectors that require a different wattage or housing format. The jump is worth it when image quality has degraded and a factory-specification refresh is the only requirement.

Highlights

  • Genuine replacement lamp restores full brightness
  • 250 W DLP bulb delivers reliable light output
  • Up to 3,000 hours life in economy mode
  • Ready-to-install module with housing included
  • Manufactured to ISO 9001 quality standards

Specifications

BrandSharp
TypeProject Lamp
Wattage250W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

How do I install the Sharp XG-PH50NL lamp module, and what step is often missed?

Power off and unplug the projector, let it cool, remove the lamp cover, loosen the retaining screws, slide the old module out, insert the new housing until it seats firmly, retighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.

What maintenance or replacement will this 250W DLP lamp need later?

The lamp itself is the only replaceable part; after 2,000 hours in normal mode or 3,000 hours in economy mode the bulb reaches end of life and the whole module must be swapped — no separate filter or bulb-only change is required.

What limit appears first during extended use of this 250W lamp?

The 2,000-hour normal-mode rating (or 3,000 hours in economy) is the first hard limit; brightness drops and the projector will warn you to replace the module once that runtime is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.