Sharp
Sharp XG-MB66X Projector Lamp 275W 2000/3000 Hrs
A ready-to-install 275 W projector lamp module rated for 2,000 to 3,000 hours of use
- TypeProjector Lamp
- Wattage275W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- 275W SHP bulb delivers bright projection
- 2000 hours normal life extends replacement intervals
- 3000 hours economy mode reduces running cost
- Ready-to-install housing saves setup time
- ISO9001 manufacturing ensures reliable performance
Direct replacement for Sharp projectors
This lamp module fits Sharp projectors that use the XG-MB66X assembly. It arrives with a 275W SHP bulb already seated in its housing, so the unit is ready to install without extra tools or alignment steps.
Replaces a dim or failed original lamp
The unit restores full brightness when the factory lamp reaches its rated 2000-hour normal life or 3000-hour economy life. Swapping it out is worthwhile once image output drops below usable levels or the projector signals end-of-life.
Limited by lamp technology and fixed wattage
The 275W rating and 2000 to 3000-hour range are set by the bulb design; they cannot be extended by settings or firmware. Buyers who need longer intervals between changes or a different power envelope will need a projector that supports an alternative lamp specification.
Highlights
- 275W SHP bulb delivers bright projection
- 2000 hours normal life extends replacement intervals
- 3000 hours economy mode reduces running cost
- Ready-to-install housing saves setup time
- ISO9001 manufacturing ensures reliable performance
Specifications
| Brand | Sharp |
|---|---|
| Type | Projector Lamp |
| Wattage | 275W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Sharp projector models accept the XG-MB66X lamp module?
This lamp module is built for Sharp projectors that use the ANXR20L2 lamp code, so it fits the XG-MB66X and other models sharing that same part number.
What is the correct way to seat the housing during installation?
Align the housing guides with the projector rails, press firmly until the latch clicks, then tighten the retaining screw; skipping the latch click is the step most often missed.
When should I plan to replace the lamp based on the rated hours?
Expect around 2000 hours in normal mode or 3000 hours in economy mode before brightness drops enough to warrant a new lamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



