Sharp
Sharp XG-F261X Projector Lamp 200W Phoenix SHP
A new 200 W replacement lamp module with Phoenix SHP bulb and housing delivers 2,000 normal or 3,000 economy hours for Sharp XG-F261X projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 200 W Phoenix SHP bulb
- 2 000 hrs normal / 3 000 hrs economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
- Direct OEM replacement for Sharp XG-F261X projectors
Replacement lamp for Sharp XG-F261X
This 200W projector lamp module ships as a fully assembled bulb and housing for direct installation in compatible Sharp projectors. It uses a Phoenix SHP bulb rated for 2000 hours in normal mode or 3000 hours in economy mode.
Upgrade from a dim or expired original lamp
Replacing the original lamp restores full brightness and colour accuracy when the existing module reaches end of life or shows significant output loss. The jump is worth it when image quality drops below acceptable levels for presentations or home viewing.
Check your projector model
Confirm the unit requires the ANXR30LP/1 lamp code used in the Sharp XG-F261X series. Verify the projector lamp timer to plan replacement timing and ensure the housing matches the existing mounting points.
Highlights
- Ready-to-install module with 200 W Phoenix SHP bulb
- 2 000 hrs normal / 3 000 hrs economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
- Direct OEM replacement for Sharp XG-F261X projectors
Specifications
| Brand | Sharp |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the XG-F261X lamp module include the housing so it fits straight into the Sharp projector?
Yes, the module is supplied as a fully assembled 200W bulb and housing ready for direct installation.
What is the correct sequence when replacing the lamp, and which step is commonly missed?
Power off the projector, allow it to cool, remove the lamp cover, swap the module, replace the cover, then reset the lamp timer in the menu; skipping the timer reset is the frequent error.
How many hours can I expect before the Phoenix SHP 200W bulb needs replacing?
The lamp is rated for 2,000 hours in Normal mode and up to 3,000 hours in Economy mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



