We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp XG-C60X projector lamp module with metal halide bulb in housing

Sharp

Sharp XG-C60X Projector Lamp 150W 2000 Hrs

SKU CH-B0VZ-FPPRN

OEM replacement lamp module for Sharp XG-C60X projectors with a 150 W metal halide bulb rated for 2,000 hours of operation

  • TypeProjector Lamp
  • Wattage150W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with bulb and housing
  • 150 W metal halide lamp for bright projection
  • 2 000-hour rated life for extended use
  • OEM-quality component built to ISO 9001 standards
  • Compatible with Sharp XG-C60X projectors

Direct replacement for Sharp XG-C60X projectors

This new projector lamp module includes a 150W Phoenix metal halide bulb pre-assembled in its housing. It matches the original Sharp ANC55LP/1 specification for tool-free installation. The unit is built to ISO 9001 quality standards and ships ready to fit compatible Sharp projectors.

Runs at 150W with a 2,000 hour rated life

The metal halide lamp draws 150 watts during normal operation and is rated for 2,000 hours of use. Typical projector cooling handles the thermal load at standard brightness settings. Acoustic output follows the projector's own fan profile.

2,000 hour lamp life decides replacement timing

A 2,000 hour rating means the bulb will need replacement after roughly that many hours of projection. Buyers who need longer intervals between changes or lower power consumption should consider projectors that accept higher-efficiency lamp types not supported by this housing.

Highlights

  • Ready-to-install module with bulb and housing
  • 150 W metal halide lamp for bright projection
  • 2 000-hour rated life for extended use
  • OEM-quality component built to ISO 9001 standards
  • Compatible with Sharp XG-C60X projectors

Specifications

BrandSharp
TypeProjector Lamp
Wattage150W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the pre-assembled Sharp XG-C60X lamp module and what step is most often missed?

Slide the fully assembled housing into the projector until it clicks, then tighten the captive screws; the step most users skip is resetting the lamp-hour counter in the projector menu.

What maintenance or replacement will the Phoenix 150 W metal-halide bulb need after its 2,000-hour rated life?

The entire lamp module must be replaced once brightness drops or the projector signals end of life; no user-serviceable parts exist inside the sealed housing.

At what point does the 150 W lamp hit its thermal limit during continuous operation?

The projector’s built-in protection shuts the lamp down if internal temperature exceeds safe thresholds, which is the first limit reached under sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.