Sharp
Sharp PG-M10X Projector Lamp 130W 1000 Hrs
A 130W replacement lamp module with a 1,000-hour rated life, supplied as a complete housing for straightforward projector installation
- TypeProjector Lamp
- Wattage130W
- Lamp Life1,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- 130 watt UHP lamp delivers reliable brightness
- 1,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Sharp PG-M10X projector models
Sharp PG-M10X Replacement Lamp
The Sharp PG-M10X is a new 130W projector lamp module supplied with a Philips UHP bulb inside a complete housing. It is designed as a direct replacement for the original lamp so the projector can be restored to full brightness without extra assembly.
Users needing a ready-to-fit 130W UHP module
This lamp suits owners of compatible Sharp projectors who want a plug-and-play 130W UHP module with 1000-hour rated life. It is not for buyers who need a different wattage, a bare bulb without housing, or a lamp rated for longer service intervals.
130W Philips UHP bulb with 1000-hour rating
The single specification that decides fitment is the 130W Philips UHP bulb rated for 1000 hours of operation. Match this wattage and lamp type to the projector's requirements before ordering.
Highlights
- Ready to install with pre-assembled bulb and housing
- 130 watt UHP lamp delivers reliable brightness
- 1,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Sharp PG-M10X projector models
Specifications
| Brand | Sharp |
|---|---|
| Type | Projector Lamp |
| Wattage | 130W |
| Lamp Life | 1,000 Hrs. |
Questions about this item
Which Sharp projector models accept the PG-M10X lamp module with the 130W UHP bulb?
The PG-M10X lamp module is designed for Sharp projectors that use the U3-130 lamp assembly; check your projector's manual to confirm the exact model compatibility before ordering.
Will the 130W UHP bulb in this housing match the brightness and ignition timing of the original lamp in my older Sharp projector?
Yes, the replacement uses a genuine Philips 130W UHP bulb built to the same ISO9001 quality standards, so brightness, voltage and ignition characteristics match the original specification.
After installing the lamp, what should I check to confirm the projector recognises the new 1000-hour module correctly?
Reset the lamp timer in the projector menu, then verify the counter starts at zero and the image reaches full brightness without flicker or error messages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Honeywell CW45-QBC-0 4-Bay Battery Charger pos system
- No Screen
- 0.7400



