We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Sharp ANXR10LP/1 projector lamp module with 275W bulb in housing

Sharp

Sharp ANXR10LP/1 275W Projector Lamp

SKU CH-S3TQ-BEGDQ

Replacement projector lamp module with 275W Phoenix bulb and housing, rated for 3,000 hours of use

  • TypeProjector Lamp
  • Wattage275W
  • Lamp Life3,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 275W Phoenix SHP bulb powers bright projection
  • 3,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time

Ready-to-install Sharp projector lamp

This 275 W Sharp ANXR10LP/1 module ships as a complete bulb-and-housing assembly so it fits straight into compatible Sharp projectors without extra assembly. It is aimed at owners who need a direct replacement that restores original brightness and colour balance quickly.

Rated 3,000 hours at full power

The Phoenix SHP 275 W bulb delivers its rated output for up to 3,000 hours under normal operating conditions. Standard projector cooling handles the thermal load, and the lamp meets ISO 9001 quality checks for ignition reliability and stable voltage during extended sessions.

Replaces a dim or expired original lamp

The jump is worth it when the existing lamp has reached its hour limit, shows noticeable brightness loss or fails to strike. It is not suited for users who need a higher-wattage upgrade or a different connector type than the original Sharp specification.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 275W Phoenix SHP bulb powers bright projection
  • 3,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time

Specifications

BrandSharp
TypeProjector Lamp
Wattage275W
Lamp Life3,000 Hrs.

Questions about this item

How do I install the Sharp ANXR10LP/1 lamp module and what step do people often miss?

The module arrives as a fully assembled 275W bulb and housing. Power off and unplug the projector, let it cool completely, then remove the old lamp assembly and insert the new one until it seats firmly; the step most people skip is resetting the projector's lamp-hour counter after installation.

What maintenance or replacement will this 275W lamp need later?

The lamp is rated for 3,000 hours of use. When brightness drops noticeably or the projector signals end of life, replace the entire module; no separate bulb-only change is required.

What limit appears first during sustained use of this 275W lamp?

The rated 3,000-hour lifespan is the primary limit; extended sessions will gradually reduce output until the projector indicates replacement is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.