We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp ANPH7LP2/1 projector lamp module with 260W bulb in housing

Sharp

Sharp ANPH7LP2/1 Projector Lamp 260W

SKU CH-XWG3-DY2CX

A 260 W replacement projector lamp module with a new Philips DLP bulb and housing, ready for easy installation and rated for 2,000 hours normal or 2,500 hours economy use

  • TypeProjector Lamp
  • Wattage260W
  • Lamp Life2,000 (Normal) - 2,500 (Economy) Hrs.
  • Ready-to-install module with bulb and housing assembled
  • 260W Philips DLP bulb powers bright projection
  • 2,000 hours normal mode or 2,500 hours economy mode
  • Manufactured to ISO 9001 quality standards
  • OEM versions from Philips, Osram, Ushio and other top makers

Ready-to-install 260 W lamp module

The Sharp ANPH7LP2/1 ships as a complete bulb-and-housing assembly, so the projector owner can swap the old module without handling a bare lamp. It fits the original projector chassis and restores factory brightness in a single step.

Steady output through rated hours

The 260 W Philips DLP bulb is rated for 2,000 hours in normal mode and 2,500 hours in economy mode, maintaining consistent luminance across the full interval rather than fading after an initial peak. Each unit is tested for ignition, voltage stability and run-time to meet ISO 9001 quality criteria.

Simple swap, no alignment needed

Because the lamp arrives pre-mounted in its housing, installation only requires opening the projector door, releasing the old module and sliding the new one into place. No bulb focusing or reflector adjustment is involved, eliminating the most common cause of dim or uneven images after a lamp change.

Highlights

  • Ready-to-install module with bulb and housing assembled
  • 260W Philips DLP bulb powers bright projection
  • 2,000 hours normal mode or 2,500 hours economy mode
  • Manufactured to ISO 9001 quality standards
  • OEM versions from Philips, Osram, Ushio and other top makers

Specifications

BrandSharp
TypeProjector Lamp
Wattage260W
Lamp Life2,000 (Normal) - 2,500 (Economy) Hrs.

Questions about this item

How hot does the 260W Sharp ANPH7LP2/1 lamp run during extended daily use?

The 260W rating means it draws significant power and generates heat; the projector's built-in cooling system manages temperature during normal or economy modes.

What existing projector hardware is required to install this Sharp ANPH7LP2/1 module?

A compatible Sharp projector that accepts the ANPH7LP2/1 lamp type; the module arrives fully assembled with housing for direct replacement.

Will this 260W lamp work reliably in an older Sharp DLP projector I have kept?

Yes, it is manufactured to ISO9001 standards using genuine Philips DLP bulbs and tested for ignition, voltage and run-time in the specified models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.