We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp AN100LP projector lamp module with 275W Phoenix bulb in housing

Sharp

Sharp AN100LP OEM Phoenix projector lamp 275W 3000 Hrs

SKU CH-8SFJ-Y0HQP

A ready-to-install 275 W projector lamp module rated for 3,000 hours of use

  • TypeProjector Lamp
  • Wattage275W
  • Lamp Life3,000 Hrs.
  • Ready-to-install module with bulb and housing included
  • 275W Phoenix SHP bulb delivers rated brightness
  • 3000-hour lamp life for extended use
  • Built to ISO 9001 quality standards
  • OEM replacement designed for Sharp projectors

Ready-to-install lamp module

The Sharp AN100LP replacement lamp arrives as a fully assembled bulb and housing unit, so it fits straight into compatible Sharp projectors without extra assembly. It is intended for owners of Sharp projectors that use the AN100LP lamp code and want a direct OEM-specification replacement.

275 W power draw and rated life

The lamp consumes 275 W during operation and is rated for 3,000 hours of typical use. Heat output and fan noise will follow the projector’s own cooling design, as the module itself adds no independent thermal or acoustic specifications beyond the stated wattage.

Phoenix SHP bulb and ISO 9001 build

Each unit uses a new Phoenix SHP 275 W bulb housed in an OEM-style carrier and is produced under ISO 9001 quality controls covering beam performance, ignition, voltage, connections and run-time. The bundle includes only the lamp module itself; no extra cables, filters or software are supplied.

Highlights

  • Ready-to-install module with bulb and housing included
  • 275W Phoenix SHP bulb delivers rated brightness
  • 3000-hour lamp life for extended use
  • Built to ISO 9001 quality standards
  • OEM replacement designed for Sharp projectors

Specifications

BrandSharp
TypeProjector Lamp
Wattage275W
Lamp Life3,000 Hrs.

Questions about this item

How do I install the Sharp AN100LP lamp module and what step do people often miss?

The module arrives as a fully assembled 275W bulb and housing; power off the projector, let it cool, remove the old lamp cage, insert the new module until it clicks, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.

What maintenance or replacement will this lamp need later?

The Phoenix SHP 275W bulb is rated for 3000 hours of use; after that the lamp module must be replaced again, and the projector's air filter should be cleaned regularly to maintain airflow.

What limit appears first during sustained use of this 275W lamp?

The 3000-hour rated lamp life is the primary limit; extended sessions also raise internal temperature, so keeping vents clear and the filter clean helps the bulb reach its full rated hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.