We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp AN-PH80LP 280W DLP projector lamp module in original housing

Sharp

Sharp AN-PH80LP 280W DLP Replacement Lamp

SKU CH-02N0-2VZ36

Original 280W DLP lamp module rated for 2000 hours, fits Sharp XG-PH80X and XG-PH80W projectors

  • TypeLamps
  • Wattage280W
  • Lamp Life2000 hours
  • CompatibilityOriginal Lamp for SHARP XG-PH80X, XG-PH80W Projectors
  • SpecificationsLamp module consists of an Original Housing/Cage and an Orig
  • FeatureDisplay device: Projector. Lamps in projector: 2. Lamps in b
  • Original Sharp housing and bulb for direct fit
  • 280W lamp matches projector power design
  • 2000 hours rated life before replacement
  • 500 g module handles easily during install
  • Built to ISO 9001 quality checks

Sharp AN-PH80LP 280W DLP Lamp

The Sharp AN-PH80LP is a 280 watt DLP replacement lamp module designed for the Sharp XG-PH80X and XG-PH80W projectors. It arrives as a complete assembly with the original housing and bulb, allowing for immediate installation without extra tools. This unit suits owners of those specific models who need a direct replacement when the original lamp reaches end of life.

280W Power Draw and 2000 Hour Life

The lamp operates at 280 watts and carries a rated life of 2000 hours under normal operating conditions. Thermal output and fan noise remain consistent with the projector's original design because the module matches the factory specifications exactly. The 500 gram weight matches the original component, so the projector's cooling system handles it without additional strain.

Replaces Original Lamp in Dual-Lamp Projectors

This module replaces a single lamp inside projectors that use two lamps simultaneously; the box contains one lamp, so a full refresh requires two units. The upgrade is worth it when brightness drops noticeably or the projector signals a lamp warning, restoring image quality to factory levels. Buyers needing a compatible third-party alternative or a different wattage should look elsewhere.

Highlights

  • Original Sharp housing and bulb for direct fit
  • 280W lamp matches projector power design
  • 2000 hours rated life before replacement
  • 500 g module handles easily during install
  • Built to ISO 9001 quality checks

Specifications

BrandSharp
ModelAN-PH80LP
Part NumberAN-PH80LP
TypeLamps
Wattage280W
Lamp Life2000 hours
CompatibilityOriginal Lamp for SHARP XG-PH80X, XG-PH80W Projectors
SpecificationsLamp module consists of an Original Housing/Cage and an Original Bulb. Manufacturer original.
FeatureDisplay device: Projector. Lamps in projector: 2. Lamps in box: 1.
Weight500 g

Questions about this item

How do I install the AN-PH80LP lamp module in my Sharp XG-PH80X projector?

Power off the projector and let it cool completely. Remove the lamp cover, undo the retaining screws, pull out the old module by its handle, insert the new AN-PH80LP until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu.

When will the AN-PH80LP lamp need replacement?

The lamp is rated for 2000 hours of use. Plan to replace it once the projector's lamp-hour counter approaches that figure or when brightness drops noticeably.

What is the first limit reached during extended projection sessions?

The 280 W lamp generates significant heat; the projector's thermal protection will shut the unit down if internal temperatures exceed safe limits during sustained operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.