We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sharp AN-D400LP-A DLP projector lamp module in black housing

Sharp

Sharp AN-D400LP-A DLP Replacement Lamp .9900 kg

SKU CH-MBG0-0JW3Y

Genuine replacement lamp and housing for Sharp projectors, weighing .9900 kg, with 90 day warranty

  • TypeProject Lamp
  • Weight0.9900
  • Genuine Sharp lamp module ensures reliable projector performance
  • Complete lamp and housing unit simplifies installation process
  • 90 day warranty provides purchase protection
  • Compatible with Sharp AN-D400LP projector models
  • Lightweight .9900 kg design eases handling and mounting

Genuine Sharp AN-D400LP-A Lamp Module

The Sharp AN-D400LP-A is a new replacement lamp and housing assembly designed for compatible Sharp DLP projectors. It restores original brightness and colour performance when the installed lamp reaches end of life. Home cinema owners and small-venue operators use it to maintain consistent image quality without replacing the entire projector. The module arrives ready to fit with no additional parts required.

Replaces a worn or failed original lamp

Swapping the AN-D400LP-A is worth it when the projector shows dimming, colour shift or a lamp-warning indicator after extended use. A fresh module returns the light output to factory specification and clears the replacement timer. The change is not justified if the projector has unrelated optical faults such as a degraded colour wheel or dust on the DMD, which a new lamp cannot fix.

Tool-free installation in minutes

The lamp housing slides into the projector’s lamp compartment and locks with the built-in latch; no screwdriver is needed for most Sharp models. The most common issue is forgetting to reset the lamp-hour counter in the on-screen menu, which leaves the warning active. Another frequent error is touching the bare bulb glass with bare fingers, which can cause premature failure.

Highlights

  • Genuine Sharp lamp module ensures reliable projector performance
  • Complete lamp and housing unit simplifies installation process
  • 90 day warranty provides purchase protection
  • Compatible with Sharp AN-D400LP projector models
  • Lightweight .9900 kg design eases handling and mounting

Specifications

BrandSharp
ModelAN-D400LP-A
Part NumberAN-D400LP-A
TypeProject Lamp
Weight0.9900

Questions about this item

What projector models does the AN-D400LP-A lamp and housing fit?

The AN-D400LP-A lamp and housing is designed as a replacement module for Sharp projectors that use the AN-D400LP lamp code.

How is the AN-D400LP-A lamp module installed in the projector?

Power off and unplug the projector, allow it to cool completely, remove the lamp cover, release the securing screws, slide the old module out, insert the new AN-D400LP-A housing until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu.

When should the AN-D400LP-A lamp be replaced?

Replace the AN-D400LP-A lamp when the projector's lamp-hour counter reaches the rated limit, the replacement indicator illuminates, or image brightness and colour uniformity noticeably decline.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.