We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit tee fitting with three quarter-inch connections

SharkBite

SharkBite U358LF 1/4 in DZR Brass Push-Fit Tee Trap

SKU CH-0R3J-VQJ17 MPN U358LF

Connects three quarter-inch tubes in a tee layout using push-fit DZR brass rated to 200 psi for potable water

  • TypeDrain Components
  • Push-fit connections install fast without tools
  • DZR brass resists dezincification for long service life
  • Rated to 200 psi maximum operating pressure
  • Three 1/4 in ports simplify tee configurations
  • Lead-free material meets potable-water requirements

SharkBite 1/4 in DZR Brass Tee

This SharkBite push-fit tee connects three 1/4 inch tubes in potable water systems. The DZR brass body resists dezincification for long service life. All three ports use push-to-connect ends for tool-free installation. The fitting is rated for 200 psi maximum operating pressure.

Replacing threaded or soldered tees

It replaces fittings that require thread sealant, flux or a torch. The jump is worth it when a quick, flame-free connection is needed in tight spaces or on repair jobs. No pre-applied thread sealant is included because the push-fit design seals on the tube outer diameter. California Proposition 65 warnings apply to this product.

Three-port capacity for simple branches

The tee comfortably handles standard 1/4 inch tube runs at the rated pressure. It runs out when the application demands larger tube diameters, higher pressure ratings or a different alloy not covered by the DZR brass construction. The material grade is 316.

Highlights

  • Push-fit connections install fast without tools
  • DZR brass resists dezincification for long service life
  • Rated to 200 psi maximum operating pressure
  • Three 1/4 in ports simplify tee configurations
  • Lead-free material meets potable-water requirements

Specifications

TypeDrain Components
BrandSharkbite
ModelU358LF

Questions about this item

What tube size fits the three push-to-connect ports on this SharkBite U358LF tee?

Each of the three ports accepts 1/4 in outer-diameter tubing for a push-fit connection.

How do you correctly install the push-fit connections on this DZR brass tee?

Cut the tube square, deburr the edge, then push it fully into each port until it stops; the internal grab ring and O-ring seal without tools.

What ongoing maintenance does this 200 psi rated brass tee require?

Periodically inspect for leaks or corrosion; replace the fitting if the O-ring degrades or the brass shows signs of dezincification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.