We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting 3/8 inch tube size 90 degree angle

SharkBite

SharkBite U246LF Push-Fit Elbow Fitting 3/8 in Brass

SKU CH-E7YV-WD2C5

Push-fit 90-degree elbow joins 3/8 in tubing for potable water up to 200 psi and 200 degrees F

  • Push-fit design enables tool-free installation on 3/8 in tubing
  • 90-degree elbow redirects flow in tight spaces
  • Brass construction resists corrosion for potable water systems
  • Rated for 200 psi at 200 °F operating conditions
  • Overall length 1 9/32 in fits compact plumbing layouts

3/8 in Push-Fit Elbow for Potable Water

The SharkBite U246LF is a brass push-fit elbow designed for potable water lines. Its 3/8 inch tube connections on both ends join copper, CPVC or PEX without solder, clamps or glue. The 90 degree bend changes direction in tight spaces while the push-to-connect design speeds installation for professionals and DIYers alike.

Rated for 200 psi and 200 Degrees F

The fitting handles sustained pressure up to 200 psi and continuous temperatures up to 200 Degrees F. Brass construction resists corrosion and dezincification in municipal water supplies. The joint remains secure under thermal cycling and pressure spikes typical of household plumbing systems.

Verify 3/8 in Tube OD and Local Codes

Confirm your existing tubing has a 3/8 inch outer diameter to match both push-fit ports. Check whether local plumbing codes accept push-fit fittings for the intended application. The product carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm.

Highlights

  • Push-fit design enables tool-free installation on 3/8 in tubing
  • 90-degree elbow redirects flow in tight spaces
  • Brass construction resists corrosion for potable water systems
  • Rated for 200 psi at 200 °F operating conditions
  • Overall length 1 9/32 in fits compact plumbing layouts

Specifications

BrandSHARKBITE

Questions about this item

Does the brass elbow fitting generate any noise or heat when water runs through it continuously?

The brass push-fit elbow has no moving parts, so it produces no noise or heat during continuous water flow.

What pipe or tubing must I already have for the 3/8-inch push-to-connect ends to seal properly?

You need 3/8-inch outer-diameter tubing — copper, PEX, CPVC or PE-RT — that is clean, round and free of scratches for the push-to-connect ports to grip.

Will this 200 psi brass elbow work alongside older copper plumbing that has been in place for years?

Yes, the fitting connects directly to existing 3/8-inch copper pipe without soldering, and its 200 psi rating matches typical residential supply pressures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.