We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting with 90-degree bend

SharkBite

SharkBite U2276LF Push-Fit Elbow Fitting 1/4 in x 3/4 in GHT Brass

SKU CH-987A-M5X54

Push-fit elbow connects 1/4 in tube to 3/4 in GHT for potable water up to 200 psi and 200°F

  • Push-fit design enables quick, tool-free installation
  • 90-degree elbow routes tubing in tight spaces
  • Brass construction resists corrosion in potable-water systems
  • Rated for 200 psi and 200 °F operating limits
  • Connects 1/4 in tube to 3/4 in GHT threads

1/4 in x 3/4 in GHT Brass Elbow

This push-fit elbow connects 1/4 inch tubing to a 3/4 inch garden hose thread. The brass body suits potable water systems. It creates a 90 degree turn without soldering or tools. The fitting handles up to 200 psi at 200 degrees F.

Upgrades from threaded or soldered elbows

Replaces compression or sweat fittings where quick installation matters. The push-to-connect end removes the need for crimp rings or flux. The jump is worth it when repairing tight spots or modifying existing lines without draining the whole system.

Check tube OD and thread type

Verify the supply tube measures exactly 1/4 inch outer diameter. Confirm the mating port uses 3/4 inch GHT threads, not NPT. Ensure system pressure and temperature stay within the 200 psi and 200 degree F limits. Note the Proposition 65 warning for California installations.

Highlights

  • Push-fit design enables quick, tool-free installation
  • 90-degree elbow routes tubing in tight spaces
  • Brass construction resists corrosion in potable-water systems
  • Rated for 200 psi and 200 °F operating limits
  • Connects 1/4 in tube to 3/4 in GHT threads

Specifications

BrandSHARKBITE

Questions about this item

What tube diameter does the push-to-connect side of the SharkBite U2276LF elbow accept?

The push-to-connect port is sized for 1/4 inch outside-diameter tubing.

How is the 3/4 inch GHT connection sealed during installation?

The fitting ships without pre-applied thread sealant, so you must add pipe tape or paste before threading it onto the garden-hose port.

What pressure and temperature limits determine when this brass elbow should be replaced?

It is rated for 200 psi and 200 degrees F; sustained exposure beyond those limits can degrade the brass or O-ring and warrants replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.