We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small rectangular black PoE splitters with Ethernet and 2.1 mm DC cables

SGUESIKR PoE Splitter 12V 1.2A 4-Pack powerline networking

SKU CH-36BF-DM2C8

Four splitters convert IEEE 802.3af/at PoE to 12 V 1.2 A DC over 328 ft with 10/100 Mbps data and opto-isolation

  • Kit Type4
  • Power Supplyno_plug
  • Features8, no_plug, false, 2 year manufacturer
  • Dimensions11.5 in x 1.1 in x 0.9 in
  • Weight0.12 pounds
  • Powers non-PoE IP cameras up to 328ft via Cat5e/Cat6
  • Delivers 12V 1.2A DC from IEEE 802.3af/at PoE sources
  • Includes opto-isolator and USA chipset for stable operation
  • Provides 10/100Mbps Ethernet data alongside power on single cable
  • Four-unit pack protects against overvoltage, short-circuit and overcurrent

4-Pack PoE Splitter for IP Cameras

This four-pack of PoE splitters converts active IEEE 802.3af/at power over Ethernet into 12 V, 1.2 A DC output through a 5.5 mm x 2.1 mm connector. Each unit also passes 10/100 Mbps data, letting non-PoE IP cameras and similar devices receive both power and network connectivity over a single Cat5e or Cat6 cable up to 328 ft.

Sustained Power Delivery

The splitters accept DC 40-57 V input from a PoE switch or injector and regulate it to a steady 18 W, 12 V / 1.2 A maximum output. Built-in multi-protection circuits guard against over-voltage, short-circuit and over-current events during continuous operation, while the opto-isolator design maintains stable separation between the power and data paths.

Thermal and Electrical Characteristics

With compact dimensions of 11.5 in x 1.1 in x 0.9 in and a weight of 0.12 lb per unit, the adapters dissipate heat through their enclosure without active cooling. The premium USA chipset and opto-electronic isolation keep power conversion efficient, so the devices run quietly and draw only what the connected camera requires under normal surveillance workloads.

Highlights

  • Powers non-PoE IP cameras up to 328ft via Cat5e/Cat6
  • Delivers 12V 1.2A DC from IEEE 802.3af/at PoE sources
  • Includes opto-isolator and USA chipset for stable operation
  • Provides 10/100Mbps Ethernet data alongside power on single cable
  • Four-unit pack protects against overvoltage, short-circuit and overcurrent

Specifications

BrandSGUESIKR
ModelSGUESIKR-POE12V-1.2A-4PACK
Kit Type4
Power Supplyno_plug
Features8, no_plug, false, 2 year manufacturer
Dimensions11.5 in x 1.1 in x 0.9 in
Weight0.12 pounds

Questions about this item

Does the 12 V 1.2 A output run warm or draw extra power when left on 24/7?

The splitter delivers up to 18 W at 12 V 1.2 A and accepts IEEE 802.3af/at input of 40–57 V, so heat and power draw stay within that rated envelope during continuous operation.

What PoE source and cabling do I need to make each unit work?

You must supply a PoE switch or PoE injector that provides IEEE 802.3af/at power over Cat5e or Cat6 cable up to 328 ft, plus the non-PoE device that takes a 5.5 mm × 2.1 mm DC plug.

Will the 10/100 Mbps Ethernet pass-through slow down a Gigabit switch I already own?

The splitter’s Ethernet port is rated at 10/100 Mbps, so a connected Gigabit switch will negotiate down to 100 Mbps on that link while other ports run at full speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.