Sephia SP3060 wired headset 10 mm driver 3.5 mm jack
Wired in-ear earbuds with a 10 mm driver, 3.5 mm jack, tangle-free 3.8 ft cord and aluminium housing for bass-driven sound and 33 dB passive isolation
- ColorBlack
- Compatible Phone ManufacturerSP3060, Betron
- Wearing StyleIn-Ear
- Ear CouplingIn Ear
- Connector3.5mm
- Driver10 millimeters
- Clear sound with 10 mm drivers and 112 dB output
- Blocks up to 33 dB noise with six tip sizes
- Lightweight aluminium housing at just 16 grams
- Tangle‑free 3.8 ft cord with 3.5 mm jack
- Plug‑and‑play on any device with a 3.5 mm port
Compact In-Ear Fit
The Sephia SP3060 is a wired in-ear headset built around a 10 mm driver and a 3.5 mm connector. It targets listeners who want lightweight, portable audio for commuting, exercise or study sessions without the bulk of over-ear designs. The aluminium housing keeps weight down to 16 grams while providing a secure seal that blocks outside sound.
Bundled Tips and Case
Six pairs of silicone tips in small, medium and large sizes let each user find a comfortable, noise-isolating fit that can reduce ambient noise by up to 33 dB. A hard carrying case protects the earbuds and the 3.8-foot tangle-free cable during transport. No microphone or inline remote is included, so calls and voice commands are not supported.
Plug-and-Play Simplicity
Installation is instant: insert the 3.5 mm plug into any compatible jack and audio plays immediately with no drivers or pairing required. The Y-shaped cord resists tangles, but the fixed cable cannot be replaced if damaged. An adapter may be needed for devices that lack a native 3.5 mm port, and the lack of a microphone limits use for communication apps.
Highlights
- Clear sound with 10 mm drivers and 112 dB output
- Blocks up to 33 dB noise with six tip sizes
- Lightweight aluminium housing at just 16 grams
- Tangle‑free 3.8 ft cord with 3.5 mm jack
- Plug‑and‑play on any device with a 3.5 mm port
Specifications
| Brand | Sephia |
|---|---|
| Model | SP3060 |
| Color | Black |
| Part Number | SP3060 |
| Compatible Phone Manufacturer | SP3060, Betron |
| Wearing Style | In-Ear |
| Ear Coupling | In Ear |
| Connector | 3.5mm |
| Driver | 10 millimeters |
| Output Power | 112 decibels |
| Frequency Response | 20000 hertz |
| Sensitivity | 112 decibels |
| Impedance | 16 ohm |
| Microphone | Tangle Free Cord |
| Remote Control | Noise Control |
| Specifications | SP3060, Black, 10.01 L x 10.01 W x 10.01 H centimeters, 16 grams, Tangle Free, 3.5 mm Jack, Wired, Wired Earbuds, 12 Months Limited Warranty against manufacturing defects, sound_isolation, Bud, In Ear |
| Features | Tangle Free |
| Dimension | 10.01 cm x 10.01 cm x 10.01 cm |
| Weight | 16 grams |
Questions about this item
How often should the S/M/L earbud tips be replaced to keep the 33 dB passive noise isolation effective?
Replace the silicone tips every 6 to 12 months or whenever they lose elasticity, crack, or no longer seal the ear canal; the pack includes three sizes so you can maintain the 33 dB isolation without buying new buds.
What is the first limit reached during hours of continuous playback at high volume?
The 16 ohm impedance and 112 dB sensitivity mean the earbuds draw very little power, so the practical limit is listener fatigue or the source device’s maximum output, not thermal compression of the 10 mm drivers.
How much heat or cable noise appears after wearing the aluminium housings all day?
The lightweight aluminium shells stay near body temperature and the tangle-free 3.8 ft Y-cord transmits minimal microphonics, so extended sessions produce no noticeable warmth or cable rustle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MCHOSE
MCHOSE Adjustable Tablet/Phone Stand Aluminum Black 4-13 inch
- Tablet Stands
$33.99
0.00039411BTC
In stock