Senco
Senco Roofing Nails 11 ga 3/4 in Coil PK7200 M003101
Electro-galvanised steel coil nails with 15-degree wire collation for compatible roofing nailers
- TypeAir Nailers
- 11 gauge steel drives securely into roofing substrates
- Electro-galvanized finish resists corrosion on exterior jobs
- 15-degree wire coil feeds smoothly in compatible nailers
- Diamond point starts cleanly without splitting shingles
- 7200-count pack covers large roof areas efficiently
Senco 11-Gauge Roofing Nails
These 11-gauge coil nails are designed for pneumatic roofing nailers. They suit professional roofers and contractors installing asphalt shingles or similar materials. The 7200-count package supports high-volume jobs without frequent reloads. Each nail measures three-quarters of an inch in length.
Coil Collation for Continuous Feeding
The wire-collated coil feeds smoothly through compatible roofing nailers during sustained runs. A 15-degree collation angle aligns with the magazine geometry of the RoofPro 445XP and RoofPro 455XP. Smooth shanks drive quickly into sheathing without splitting wood. Electro-galvanized steel resists corrosion through extended exposure.
Diamond Point and 0.12-Inch Shank Diameter
The diamond point starts cleanly in dense shingle layers and reduces the chance of blow-through. Shank diameter of 0.12 inch matches the 11-gauge specification for holding power in roofing applications. Full round heads provide bearing surface required by many building codes. Verify nailer compatibility before purchase.
Highlights
- 11 gauge steel drives securely into roofing substrates
- Electro-galvanized finish resists corrosion on exterior jobs
- 15-degree wire coil feeds smoothly in compatible nailers
- Diamond point starts cleanly without splitting shingles
- 7200-count pack covers large roof areas efficiently
Specifications
| Type | Air Nailers |
|---|---|
| Brand | Senco |
Questions about this item
How much power does the nailer draw when running all day with these 11 ga nails?
These are consumable nails, not a powered tool, so they draw no power and produce no heat or noise themselves.
Which nailer models must I already own to use these 3/4 in coil nails?
They are made for the Senco RoofPro 445XP and RoofPro 455XP coil nailers.
Will the 15 degree wire collation feed reliably in my older Senco roofing nailer?
The 15 degree wire coil matches the collation angle required by the RoofPro 445XP and 455XP; other models may not accept this angle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
