Senco
Senco L13BABN 18-Gauge 1/4 in x 1 in Electro-Galvanized Staples 5000-Pack
Electro-galvanized 18-gauge staples with 1-inch legs, medium crown and chisel points, supplied in a 5000-count stick collation for pneumatic fastening
- TypePneumatic Nails & Staples
- Medium crown 1/4 in width suits diverse fastening tasks
- 18-gauge steel thickness delivers strength for demanding applications
- 1 in leg length provides secure hold in various materials
- Electro-galvanized finish resists rust for indoor and outdoor use
- Chisel point design enables smooth penetration with minimal damage
Medium-crown 18-gauge staples
The Senco L13BABN staples use an 18-gauge wire thickness with a 1/4-inch crown width and a one-inch leg length. They are collated in sticks of 5000 pieces for pneumatic staplers that accept this gauge and crown profile. The chisel point eases penetration into wood, sheathing and similar substrates. This pack suits trim, cabinet and light framing work where a medium crown is specified.
Gauge and crown compatibility
Only staplers rated for 18-gauge, 1/4-inch medium-crown staples can fire these fasteners; narrower or wider crown tools will jam or misfire. The one-inch leg limits material thickness to roughly three-quarters of an inch for full clinch, so thicker stock requires longer staples. Stick collation feeds reliably in compatible magazines but cannot be used in coil-fed or loose-staple guns. Electro-galvanized coating resists rust but is not rated for continuous salt-spray or marine exposure.
Steel construction with galvanized finish
Each staple is formed from steel wire and electro-galvanized to slow corrosion during indoor and outdoor use. The chisel point reduces splitting in softwoods and engineered panels while driving cleanly through denser material. Stick collation keeps the 5000-count pack organised and prevents tangles during reloads. Store the box dry to preserve the coating; prolonged moisture will degrade galvanization over time.
Highlights
- Medium crown 1/4 in width suits diverse fastening tasks
- 18-gauge steel thickness delivers strength for demanding applications
- 1 in leg length provides secure hold in various materials
- Electro-galvanized finish resists rust for indoor and outdoor use
- Chisel point design enables smooth penetration with minimal damage
Specifications
| Brand | SENCO |
|---|---|
| Type | Pneumatic Nails & Staples |
Questions about this item
Should I pick the 5000-count box or a smaller pack for my 18-gauge stapler?
The 5000-staple stick collation suits high-volume jobs and reduces reloads; choose a smaller quantity only if you do occasional light work.
What does the 1-inch leg length mean when I drive these into trim or sheathing?
A 1-inch leg provides deep penetration for secure holding in wood, plywood and similar substrates without over-driving.
Will the electro-galvanized finish hold up on exterior fascia boards?
The galvanized coating resists rust and corrosion, making these staples suitable for both indoor and outdoor applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
