Senco
Senco HC27APBX Framing Nail 3 in 11 ga 34° PK2500 fastener
3-inch, 11-gauge steel framing nails with 34° tape collation in a 2,500-count bulk pack for compatible Senco nailers
- TypePower Staplers
- 3 in length drives deep into framing lumber
- 11 gauge steel shank resists bending under load
- 34 degree collation angle feeds smoothly in compatible nailers
- 2500 count bulk pack reduces reload frequency on large jobs
- Diamond point starts cleanly and reduces wood splitting
Framing Nails for 34° Strip Nailers
These 3-inch clipped-head nails are collated at a 34-degree angle on tape strips for use with Senco F-35XP, FN91T1, FP325XP, FP701XP and FP751XP framing nailers. The 11-gauge smooth shank measures .12 inches in diameter and features a diamond point for consistent driving. Each bulk pack contains 2500 plain steel fasteners manufactured in the USA.
Upgrade from Loose or Mismatched Collation
Switching to this 34-degree tape strip eliminates jams caused by incorrect collation angles or worn plastic strips. The jump is worth it when your current nailer skips or bends fasteners because the strip geometry does not match the tool's magazine. Builders who need a different length, gauge or head style should select the appropriate collated strip for their specific application.
Bulk Pack Feeds High-Volume Framing
The 2500-count box keeps a crew supplied through extended framing runs without frequent reloads. Plain steel finish suits interior structural work where corrosion resistance is not required. The smooth shank drives cleanly into standard lumber; users needing ring-shank holding power or galvanised protection for treated timber must choose a different fastener specification.
Highlights
- 3 in length drives deep into framing lumber
- 11 gauge steel shank resists bending under load
- 34 degree collation angle feeds smoothly in compatible nailers
- 2500 count bulk pack reduces reload frequency on large jobs
- Diamond point starts cleanly and reduces wood splitting
Specifications
| Brand | SENCO |
|---|---|
| Type | Power Staplers |
Questions about this item
Which nail guns accept the 34° tape-collated strips in this 2500-count box?
The strips feed Senco models F-35XP, FN91T1, FP325XP, FP701XP and FP751XP.
What is the correct way to load the 34° tape strips so the 3 in. nails feed without jamming?
Insert the strip with the clipped heads facing the nose and the tape running along the magazine rail; do not reverse the strip or the diamond points will catch.
When should I replace a strip of these 11 ga plain-steel framing nails during a job?
Swap the strip when the tape tears, the clipped heads deform, or the smooth shanks show rust that could stain lumber.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
