Senco
Senco AX18EAA 18 ga Galvanized Brad Nails 5000 pack
18-gauge galvanized brad nails, 1-5/8 in. long, glue-collated strips for pneumatic finish nailers, 5000-piece pack
- TypePneumatic Nails & Staples
- 18-gauge brad profile fits standard finish nailers
- Galvanized steel coating resists corrosion on exterior trim
- 1-5/8 inch length suits baseboard and crown moulding
- Smooth shank with conical point drives cleanly without splitting
- 5000-piece strip collation keeps production moving
18 ga galvanised brad nails
This pack contains 5000 straight finishing nails measuring 1-5/8 in overall length with a 0.039 in shank diameter. The 18 gauge steel nails have a galvanised finish for corrosion resistance and a conical point for clean entry into trim and moulding. They are collated in glue-bonded strips for use with compatible 18 ga pneumatic nailers.
Strip collation and tool fit
Glue-collated strips load quickly into most 18 ga brad nailers, reducing jam risk compared with loose nails. The 7/64 in brad head seats flush in finish work without splitting thin stock. Verify that your nailer accepts 1-5/8 in length and strip-style collation; longer or wire-collated nails will not feed correctly.
Length and gauge constraints
The 1-5/8 in length limits use to trim, paneling and light assembly where deeper penetration is unnecessary. An 18 ga shank lacks the holding power required for structural framing or heavy hardwood joinery. Galvanised coating suits interior and protected exterior applications but is not rated for continuous ground contact or marine environments.
Highlights
- 18-gauge brad profile fits standard finish nailers
- Galvanized steel coating resists corrosion on exterior trim
- 1-5/8 inch length suits baseboard and crown moulding
- Smooth shank with conical point drives cleanly without splitting
- 5000-piece strip collation keeps production moving
Specifications
| Brand | SENCO |
|---|---|
| Type | Pneumatic Nails & Staples |
Questions about this item
How can I confirm the nails feed correctly in my 18 ga nailer after loading a strip?
Load a strip, connect air, and fire a few test shots into scrap wood; each nail should advance cleanly, drive flush, and leave a 7/64 in. brad head with no jams.
What comes in the 5000-count pack and what must I supply myself?
The box contains 5000 galvanized 18 ga brad nails collated in glue strips; you must provide a compatible 18 ga pneumatic nailer and compressed-air supply.
Which nail length and gauge should I choose for standard trim work?
Select the 1-5/8 in. length, 18 gauge, .039 in. shank diameter nails — they match the listed specs for finish and trim applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
