We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black-and-yellow 18 AWG PCIe cables, 6-pin male to dual 8-pin (6+2) male, 8.86 inches long

segotep

segotep 1007 6 Pin to Dual 8 Pin (6+2) PCIe Power Cable 8.86 in 2-Pack

SKU CH-A7Z8-6V6RN MPN 1007

A 6-pin to dual 8-pin (6+2) PCIe power cable splitters a single PSU connector into two GPU feeds, 8.86 inches long with 18 AWG tinned-copper conductors rated to 80 °C

  • Powers dual GPUs from one 6-pin PSU connector
  • 86-inch length fits compact builds cleanly
  • 6+2-pin male ends support both 6-pin and 8-pin graphics cards
  • 18 AWG tinned copper handles 80 °C rated temperature
  • Compatible with Cooler Master and Thermaltake 6-pin modular PSUs

6-Pin to Dual 8-Pin PCIe Adapter

This adapter cable converts a single 6-pin PSU output into two 8-pin (6+2) male connectors for graphics cards. It is built for builders whose power supply lacks enough native 8-pin leads. The pack contains two cables, each measuring 8.86 inches in length.

18 AWG Tinned Copper Conductors

Each cable uses 18 AWG wire with 34 strands of 0.12 mm tinned copper, rated to 80 °C and insulated in PVC with a 2.1 mm outer diameter. The gauge and strand count give enough headroom for typical mid-range GPU loads. Very high-wattage cards drawing sustained peak power may exceed the safe current capacity of a single 6-pin source.

PSU Compatibility Limits

The cable is only compatible with Cooler Master and Thermaltake power supplies that provide a 6-pin PCIe port. It will not work with EVGA, Corsair or Antec modular PSUs due to different pin-outs. It is also designed solely for graphics cards and cannot power motherboard CPU connectors.

Highlights

  • Powers dual GPUs from one 6-pin PSU connector
  • 86-inch length fits compact builds cleanly
  • 6+2-pin male ends support both 6-pin and 8-pin graphics cards
  • 18 AWG tinned copper handles 80 °C rated temperature
  • Compatible with Cooler Master and Thermaltake 6-pin modular PSUs

Specifications

No published specifications for this item yet.

Questions about this item

Will this 6-pin-to-dual-8-pin cable work with my existing CoolerMaster or Thermaltake PSU?

Yes, the 6-pin male end is designed for CoolerMaster and Thermaltake modular PSUs with a 6-pin PCIe port. It is not compatible with EVGA, Corsair or Antec units.

How can I verify the 18 AWG tinned-copper conductors are delivering stable power after installation?

Check that the GPU powers on without throttling or shutdown under load, and confirm the connectors seat fully into both the PSU and the graphics card.

What exactly comes in the 2-pack and do I need any extra adapters?

The pack contains two 8.86-inch cables, each with a 6-pin male PSU connector splitting to two 8-pin (6+2) male GPU connectors. No additional adapters are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.