We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Seeed Studio Wio Tracker L1 Pro GPS device with 1.3 inch OLED screen in rugged 3D printed enclosure

Seeed Studio Wio Tracker L1 Pro GPS Navigation 1.3" OLED 1 MB Flash 256 kB RAM 2000 mAh Battery

SKU CH-8SQY-1QQD9

A rugged Meshtastic tracker with 1.3" OLED, GPS/BeiDou/GLONASS/QZSS, LoRa 862-930 MHz, Bluetooth 5.0, 2000 mAh battery, solar and USB-C charging, Grove expansion, IP65 rated

  • TypeRuggedized Design, Long Battery Life, Rechargeable
  • ReceiverL1 Pro, T1000-E, seeed studio
  • ChannelsL1 Pro
  • Accuracy (Velocity)Ruggedized Design, Long Battery Life, Rechargeable
  • Warm Acquisition TimesRuggedized Design, Long Battery Life, Rechargeable
  • 3D ViewRuggedized Design, Long Battery Life, Rechargeable
  • Ready for adventure with rugged 3D-printed enclosure
  • Pre-flashed Meshtastic firmware for instant mesh networking
  • Triple power options: 2000 mAh battery, Type-C, solar
  • 3" OLED display with 128x64 resolution
  • Grove ecosystem compatibility for sensor expansion

Rugged GPS tracker for off-grid messaging

The Wio Tracker L1 Pro is a handheld GPS navigation device built around a 1.3 inch OLED display and a 2000 mAh rechargeable battery. It targets outdoor enthusiasts and developers who need location tracking and text messaging without cellular coverage. The unit ships pre-flashed with Meshtastic firmware inside a ready-to-use 3D-printed enclosure.

Expands via Grove ports and USB-C power

The tracker adds sensors or actuators through the Grove ecosystem while PTH headers and an SWD interface expose the nRF52840 for custom firmware work. Power comes from the internal cell, a USB-C port at 5 V 1 A or a solar input at the same voltage, so the device can stay active during multi-day trips. No separate programmer or enclosure is required to start developing.

Meshtastic LoRa mesh sustains multi-kilometre links

LoRa on the Wio-SX1262 radio operates between 862 and 930 MHz, delivering up to 8 km line-of-sight range for peer-to-peer messaging. The Cortex-M4F core at 64 MHz manages the mesh stack and GPS fix from the L76K receiver while the 1 MB flash and 256 kB RAM hold maps and logs. Bluetooth 5.0 bridges the tracker to a phone for configuration, not for long-range data.

Highlights

  • Ready for adventure with rugged 3D-printed enclosure
  • Pre-flashed Meshtastic firmware for instant mesh networking
  • Triple power options: 2000 mAh battery, Type-C, solar
  • 3" OLED display with 128x64 resolution
  • Grove ecosystem compatibility for sensor expansion

Specifications

Brandseeed studio
ModelL1 Pro
Part NumberT1000-E
TypeRuggedized Design, Long Battery Life, Rechargeable
ReceiverL1 Pro, T1000-E, seeed studio
ChannelsL1 Pro
Accuracy (Velocity)Ruggedized Design, Long Battery Life, Rechargeable
Warm Acquisition TimesRuggedized Design, Long Battery Life, Rechargeable
3D ViewRuggedized Design, Long Battery Life, Rechargeable
Voice GuidanceMeshtastic app
Audio FeaturesRuggedized Design, Long Battery Life, Rechargeable
BasemapMeshtastic app
Maps IncludedMeshtastic app
Trip ComputerRuggedized Design, Long Battery Life, Rechargeable
Operating SystemMeshtastic app
ProtocolRuggedized Design, Long Battery Life, Rechargeable
ChipsetL1 Pro, T1000-E, seeed studio
MemoryT1000-E
Memory Card CapacityT1000-E
Screen Size1.0"
LED IndicatorRuggedized Design, Long Battery Life, Rechargeable
Display FeaturesRuggedized Design, Long Battery Life, Rechargeable
PC InterFace SupportedLoRa Antenna
Bluetooth CapabilityBluetooth
Digital PlayerRuggedized Design, Long Battery Life, Rechargeable
Tuner BandsT1000-E
Battery Capacity2000 milliamp_hours
MountRuggedized Design, Long Battery Life, Rechargeable
GPS System FeaturesRuggedized Design, Long Battery Life, Rechargeable
Height2.59 L x 1.45 W x 3.93 H inches
Depth2.59 L x 1.45 W x 3.93 H inches
Width2.59 L x 1.45 W x 3.93 H inches
Weight0.23 pounds
Whats in the BoxWio Tracker L1 Board with 1.3 inch OLED Display, 3D-Printed Enclosure and battery, LoRa Antenna

Questions about this item

How long does the 2000 mAh battery last with the 1.3" OLED running continuously?

The manufacturer rates the L1 Pro at 5 to 7 days of typical use with the 1.3 inch OLED active, powered by the built-in 2000 mAh cell.

Does the nRF52840 processor throttle or the enclosure get hot during all-day GPS tracking?

The Cortex-M4F core runs at 64 MHz within a ruggedised 3D-printed enclosure rated IP65, designed for continuous outdoor operation without active cooling.

What must I already have to start a Meshtastic mesh network with this tracker?

You need at least one other Meshtastic-compatible node — such as another Wio Tracker, a SenseCAP T1000-E or a Solar Node P1-Pro — and the Meshtastic smartphone app for initial configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.