We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 50ml bottles of blue and red threadlocker liquid

Sealer 50ml 2 Pack Blue Red Anaerobic Curing

SKU CH-8X49-535VS

Two 50 ml bottles of anaerobic threadlocker supply medium and high-strength formulas that prevent loosening from vibration, seal against corrosion, and cure fully in 24 hours

  • FeaturesAnaerobic Curing
  • Two strengths in one pack cover medium and permanent locking needs
  • 50 ml bottles supply enough threadlocker for multiple automotive or DIY jobs
  • Anaerobic curing seals threads to stop loosening from vibration and thermal cycling
  • Initial cure in 10 to 20 minutes with full strength reached in 24 hours
  • Formula blocks rust and corrosion while sealing against leakage

Two-colour threadlocker set

This pack contains one 50 ml bottle of blue threadlocker for medium-strength removable bonds and one 50 ml bottle of red threadlocker for high-strength permanent locking. Both anaerobic formulas cure in the absence of air to secure nuts, bolts and screws on metal fasteners. The dual-strength approach lets technicians choose the right hold for each assembly without buying separate products.

Fits standard fastener workflows

Apply the liquid evenly to clean threads, assemble the joint and allow 10 to 20 minutes for initial cure before putting the assembly into service. Full anaerobic cure completes within 24 hours, eliminating the need for lock washers, nylon inserts or other mechanical locking devices. The seal also blocks moisture ingress to prevent rust, corrosion and fluid leakage at the joint.

Sustained vibration and thermal resistance

Once cured, the anaerobic polymer maintains clamping force under continuous vibration, shock loads and repeated thermal cycling. Red threadlocker requires localised heat and tools for disassembly due to its high breakaway torque, while blue threadlocker releases with hand tools at any time. Both formulations retain their sealing and locking performance for the service life of the fastener.

Highlights

  • Two strengths in one pack cover medium and permanent locking needs
  • 50 ml bottles supply enough threadlocker for multiple automotive or DIY jobs
  • Anaerobic curing seals threads to stop loosening from vibration and thermal cycling
  • Initial cure in 10 to 20 minutes with full strength reached in 24 hours
  • Formula blocks rust and corrosion while sealing against leakage

Specifications

BrandGNEOCO
FeaturesAnaerobic Curing

Questions about this item

How long does the anaerobic threadlocker take to reach full cure once the fasteners are tightened?

Initial cure occurs in 10-20 minutes, with full cure reached within 24 hours at room temperature.

What temperature resistance does the red high-strength threadlocker provide for all-day engine or machinery operation?

The anaerobic formulation maintains its bond through thermal cycling and vibration, preventing loosening during sustained high-heat running.

Which tools are required to remove bolts secured with the blue medium-strength threadlocker versus the red high-strength version?

Blue allows disassembly with standard hand tools at any time, while red requires heating to break the permanent bond before tools can turn the fastener.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.