We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple threadlocker bottle, 50 ml, anaerobic curing adhesive for metal fasteners

Sealer 50ml

SKU CH-FG30-CQX4E

Low-strength anaerobic threadlocker prevents loosening and corrosion on nuts, bolts and fasteners with 20-minute initial cure and full strength in 24 hours

  • FeaturesRust and Corrosion Prevention, Wide Application
  • Low-strength threadlocker prevents loosening on fasteners
  • Anaerobic cure protects threads from rust and corrosion
  • Initial set in 20 minutes with full cure in 24 hours
  • Suitable for automotive, industrial and furniture applications
  • 50 ml bottle half-filled to keep adhesive liquid until use

Threadlocker for metal fasteners

This anaerobic adhesive secures nuts, bolts and other threaded metal parts against loosening caused by vibration. It also forms a seal that blocks moisture to prevent rust and corrosion on the assembly. The low-strength formulation allows disassembly with standard hand tools when maintenance is required. Suitable for automotive, industrial and general furniture applications.

Replaces mechanical locking hardware

The compound eliminates the need to stock separate lock nuts, spring washers or nylon inserts for each fastener size. A single bottle covers a wide range of thread diameters, reducing parts inventory and assembly time. The switch is worthwhile whenever a joint must stay tight under vibration but still be serviceable without heat or special extractors.

Cures to full strength in twenty-four hours

Initial fixture strength is reached after twenty minutes, allowing the component to be handled or moved carefully. Complete anaerobic curing across the bond line requires twenty-four hours at room temperature before the joint sees full service loads. The 50 ml container is supplied half-full to preserve liquid stability by maintaining an air gap that prevents premature hardening in the bottle.

Highlights

  • Low-strength threadlocker prevents loosening on fasteners
  • Anaerobic cure protects threads from rust and corrosion
  • Initial set in 20 minutes with full cure in 24 hours
  • Suitable for automotive, industrial and furniture applications
  • 50 ml bottle half-filled to keep adhesive liquid until use

Specifications

BrandGNEOCO
FeaturesRust and Corrosion Prevention, Wide Application

Questions about this item

How much threadlocker comes in the bottle and why is it only half-full?

The bottle holds 50 ml of liquid anaerobic threadlocker; it is deliberately half-full so air contact keeps the adhesive from solidifying inside the container.

What is the correct curing sequence after I apply it to a fastener?

Apply the purple threadlocker evenly to the threads, assemble the joint, wait 20 minutes for initial cure, then allow a full 24 hours before putting the assembly into normal service.

When will the threadlocker need to be reapplied on a fastener that sees repeated vibration?

The low-strength anaerobic bond is designed for the service life of the joint; if the fastener is later removed for maintenance, clean the threads and apply fresh threadlocker before reassembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.