Seagate
Seagate ST2000NM0024 2TB 7200 RPM 3.5" SATA HDD accessory
A 2 TB 3.5-inch SATA hard drive spinning at 7200 RPM with 128 MB cache
- 7200 RPM spindle speed enables fast data access
- 128 MB cache accelerates read and write performance
- 2 TB capacity stores large enterprise datasets
- 5 inch form factor fits standard drive bays
- SATA 6 Gb/s interface provides high-throughput connectivity
Enterprise-class 2 TB hard drive
The Seagate ST2000NM0024 is a 2 TB 3.5-inch hard drive spinning at 7200 RPM with a 128 MB cache and a 6 Gb/s SATA interface. It belongs to the Seagate Enterprise product line and arrives with zero powered-on hours. The drive is designed for continuous operation in storage arrays, servers or workstations that demand sustained throughput.
Suited for bulk storage arrays.
This drive fits users who need high-capacity, 7200 RPM storage for RAID sets, NAS units or surveillance recorders. It is not intended for laptop upgrades, external enclosures that require 2.5-inch form factors, or systems where low acoustic noise is a primary requirement. Buyers seeking solid-state speed or a smaller physical footprint should consider other storage types.
Verify 3.5-inch bay, SATA power and data cables
Before ordering, confirm that your chassis has an available 3.5-inch drive bay and that your power supply provides a SATA power connector. Ensure the motherboard or RAID controller offers a free SATA 6 Gb/s port and that your operating system supports drives larger than 2 TB. Check mounting screw compatibility for the specific enclosure.
Highlights
- 7200 RPM spindle speed enables fast data access
- 128 MB cache accelerates read and write performance
- 2 TB capacity stores large enterprise datasets
- 5 inch form factor fits standard drive bays
- SATA 6 Gb/s interface provides high-throughput connectivity
Specifications
No published specifications for this item yet.
Questions about this item
What SATA controller or motherboard port is required to run this 6Gb/s drive?
Any SATA 6Gb/s (SATA III) port will run the ST2000NM0024 at full speed; it also works on older 3Gb/s ports at reduced throughput.
Will this 3.5-inch 7200 RPM enterprise drive fit in the same bay and use the same cables as my older 3.5-inch SATA drives?
Yes, it uses the standard 3.5-inch form factor and SATA data plus power connectors, so it drops into existing bays and cabling.
How can I confirm the drive is healthy and performing at 7200 RPM after installation?
Check SMART data for zero reallocated sectors and use a benchmark tool to verify sustained transfer rates consistent with a 7200 RPM SATA drive.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



