Seagate
Seagate ST2000NM0023 2TB 7.2K RPM SAS 3.5" HDD accessory
A 2 TB SAS hard drive spinning at 7200 RPM with 128 MB cache in a 3.5 inch form factor
- 2 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential throughput
- 128 MB cache accelerates frequent read operations
- SAS interface connects to enterprise controllers
- 5 inch form factor fits standard drive bays
Enterprise SAS Storage Drive
The Seagate Constellation ST2000NM0023 is a 2TB 3.5-inch hard disk drive built for enterprise storage arrays. It spins at 7200 RPM with a 128 MB cache and connects through a 6Gb/s SAS interface. The unit is supplied new with zero operating hours.
For RAID Arrays and Servers
This drive suits administrators expanding SAS-based RAID enclosures, backup appliances or surveillance recorders that require dual-port SAS connectivity. It will not work in systems that lack a SAS host bus adapter or backplane, so builders using consumer motherboards should look elsewhere.
6Gb/s SAS Interface Decides Compatibility
The single specification that determines fit is the SAS interface, which requires a compatible controller or backplane supporting 6Gb/s signalling. Verify your enclosure or server accepts 3.5-inch SAS drives before purchase.
Highlights
- 2 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential throughput
- 128 MB cache accelerates frequent read operations
- SAS interface connects to enterprise controllers
- 5 inch form factor fits standard drive bays
Specifications
No published specifications for this item yet.
Questions about this item
Will the 7200 RPM SAS drive work in my older 3 Gb/s SAS backplane?
The drive uses a 6 Gb/s SAS interface and is backward compatible with 3 Gb/s SAS backplanes, though it will run at the slower link speed.
How can I confirm the 128 MB cache and 2 TB capacity are recognised after installation?
Check the drive details in your RAID controller BIOS or operating system disk utility; both should report 2 TB capacity and 128 MB cache for the ST2000NM0023.
Does the OEM package include mounting screws, cables or a tray for the 3.5" bay?
The OEM drive ships without screws, cables or a tray; you will need to supply 3.5" mounting hardware and a SAS data/power cable separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



