We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch SATA hard drive with circuit board visible

Seagate

Seagate ST1000NM0051 1TB 7200RPM 64MB 3.5" SATA HDD

SKU CH-98NA-2PTQ1 MPN ST1000NM0051

A 1 TB 7200 RPM SATA hard drive with 64 MB cache in a 3.5 inch form factor

  • 1 TB capacity for bulk storage needs
  • 7200 RPM spindle speed for responsive data access
  • 64 MB cache buffer to smooth read and write bursts
  • SATA 6 Gbps interface for broad system compatibility
  • 5 inch form factor fits standard drive bays

Constellation 1TB enterprise drive

The Seagate Constellation ST1000NM0051 is a 3.5-inch hard disk built for continuous operation in servers and storage arrays. It delivers 1TB of capacity at 7200 RPM with a 64 MB cache for sustained throughput.

SATA 6Gbps interface and 3.5-inch form factor

The drive connects through a standard SATA 6Gbps interface, so it fits any 3.5-inch bay with a SATA data and power cable. No special brackets or adapters are required for typical rackmount or tower chassis.

Verify bay height and controller compatibility

Confirm the enclosure accepts a full-height 3.5-inch unit and that the host controller supports SATA 6Gbps speeds. Systems limited to SATA 3Gbps will work but at reduced transfer rates.

Highlights

  • 1 TB capacity for bulk storage needs
  • 7200 RPM spindle speed for responsive data access
  • 64 MB cache buffer to smooth read and write bursts
  • SATA 6 Gbps interface for broad system compatibility
  • 5 inch form factor fits standard drive bays

Specifications

No published specifications for this item yet.

Questions about this item

Does the SATA interface on the ST1000NM0051 support 6Gbps speeds?

Yes, the drive uses a SATA 6Gbps interface for data transfer.

What drive bay size does the 3.5in form factor require?

It fits a standard 3.5in internal drive bay in a desktop chassis or server.

How do I connect the ST1000NM0051, and what step is often missed?

Attach a SATA data cable to the motherboard and a SATA power cable from the PSU; the step often missed is securing both connectors firmly so they do not work loose.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.