We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SE

SE Gemini II Dual Tube Cardioid Condenser Microphone

SKU CH-DZKZ-3M64Y

Dual-tube cardioid condenser microphone with 12AX7 input and 12AU7 output tubes, 20 Hz to 20 kHz frequency range, 122/132 dB dynamic range with 10 dB pad, 200 Ohm impedance, includes power supply.

  • TypeCondenser Microphones
  • Dual-tube design adds harmonic warmth to recordings
  • 20 Hz – 20 kHz range captures full audible spectrum
  • 122 dB dynamic range preserves quiet and loud detail
  • 10 dB pad handles high-SPL sources without distortion

Dual-Tube Cardioid Condenser Microphone

The SE Gemini II uses a 12AX7 input tube and a 12AU7 output tube to deliver a classic valve sound. Its cardioid polar pattern focuses on the source while rejecting off-axis noise. The unit ships with a dedicated power supply unit, a shockmount and a protective case for immediate studio use.

Sustained Session Performance

A selectable 0 or 10 dB attenuation pad manages high sound-pressure levels without distortion during long takes. The design maintains a dynamic range of 122 dB or 132 dB depending on the pad setting. Consistent tube operation is supported by the external power supply, keeping electrical impedance stable at 200 Ohms with a recommended load impedance above 1 kOhms.

Highlights

  • Dual-tube design adds harmonic warmth to recordings
  • 20 Hz – 20 kHz range captures full audible spectrum
  • 122 dB dynamic range preserves quiet and loud detail
  • 10 dB pad handles high-SPL sources without distortion

Specifications

BrandSE
TypeCondenser Microphones

Questions about this item

How much heat or noise does the dual-tube design generate during long sessions?

The 12AX7 input and 12AU7 output tubes are housed in the external power supply unit, keeping heat and any tube hum away from the microphone body.

What connector and phantom power does the mic need from my interface?

The microphone connects to the included power supply via its dedicated multi-pin cable; the supply then plugs into mains power, so no phantom power or preamp input is required from your interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.