Scotch
Scotch Series 35 Vinyl Electrical Tape 3/4 in x 66 ft Red
Vinyl electrical tape rated for 600 V, 17 lb/in tensile strength and 220 °F maximum operating temperature
- Color/FinishRed
- UL Listed and CSA Certified for code compliance
- 600 V rating handles residential and light commercial circuits
- 00 mil vinyl backing resists abrasion and moisture
- 17 lb/in tensile strength holds firm under strain
- Rated to 220 °F for reliable performance in heat
Electrical tape for 600 V insulation
Scotch Series 35 vinyl electrical tape is a continuous roll designed for general-purpose insulation and splicing tasks. The rubber adhesive bonds to wire jackets and itself, forming a moisture-resistant seal. Electricians and maintenance technicians use it for colour-coded phase identification in panels and junction boxes.
7.00 mil thickness meets UL 510 and CSA
The tape backing measures 7.00 mil thick and carries a 600 V maximum voltage rating, satisfying UL 510 and CSA certification requirements. Tensile strength reaches 17 lb. per inch while adhesive strength holds at 20 oz. per inch. Maximum continuous operating temperature is 220 degrees F.
Red colour enables phase marking
The red vinyl backing provides immediate visual identification of specific circuits or phases without additional labels. UV resistance is not included, so prolonged outdoor exposure will degrade the material. The 66 ft roll supplies enough length for multiple jobs while remaining compact for tool-pouch storage.
Highlights
- UL Listed and CSA Certified for code compliance
- 600 V rating handles residential and light commercial circuits
- 00 mil vinyl backing resists abrasion and moisture
- 17 lb/in tensile strength holds firm under strain
- Rated to 220 °F for reliable performance in heat
Specifications
| Brand | Scotch |
|---|---|
| Color/Finish | Red |
Questions about this item
What does the 7.00 mil thickness mean when I am wrapping a splice?
At 7.00 mil the tape is thick enough to build insulation quickly, so fewer wraps reach the 600 volt rating while the rubber adhesive stays flexible in cold weather.
How does the UL 510 listing and 600 volt rating limit what circuits I can use this on?
UL 510 certifies the vinyl backing and rubber adhesive for 600 volts maximum, so the tape is approved for building wiring and control circuits up to that voltage.
Will the 3/4 in. width fit standard electrician pouches and dispensers?
The 3/4 in. width matches the industry standard roll size, so it slides into common belt pouches, handheld dispensers and toolbox compartments without trimming.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
