Scotch
Scotch Electrical Tape 35 Violet 3/4 In. x 66 ft
Vinyl electrical tape rated to 600 volts and 220 °F with 17 lb./in. tensile strength on a 66 ft roll
- Color/FinishViolet
- UL Listed and CSA Certified for 600 V applications
- 00 mil vinyl backing resists abrasion and moisture
- Rubber adhesive holds at 20 oz./in. up to 220 °F
- 17 lb./in. tensile strength withstands pulling stress
- 66 ft roll covers multiple wiring jobs
Purpose-built vinyl tape for professional
This UL Listed and CSA Certified roll meets ASTM D1000 and RoHS 2002/95/EC requirements. It is designed for general electrical insulation and splicing tasks up to 600 volts. The rubber-based adhesive bonds reliably to wire jackets and conduit surfaces in standard indoor environments.
66-foot roll with 7.00-mil thickness handles
The vinyl backing provides 17 lb./in. tensile strength and 20 oz./in. adhesive strength for secure wraps that resist unwinding. Rated to 220 degrees F, it maintains integrity in warm panels but offers no UV resistance for prolonged outdoor exposure. The continuous roll yields enough length for multiple branch-circuit jobs before replacement.
Series 35 construction omits UV stabilisers
Without UV resistance the tape degrades faster in direct sunlight, so installers should choose a weather-rated alternative for exterior mast or service-drop work. The violet colour coding aids phase identification in multi-wire panels. No additional accessories or software are bundled with this consumable roll.
Highlights
- UL Listed and CSA Certified for 600 V applications
- 00 mil vinyl backing resists abrasion and moisture
- Rubber adhesive holds at 20 oz./in. up to 220 °F
- 17 lb./in. tensile strength withstands pulling stress
- 66 ft roll covers multiple wiring jobs
Specifications
| Brand | SCOTCH |
|---|---|
| Color/Finish | Violet |
Questions about this item
Will the 7.00 mil thickness and rubber adhesive bond reliably to the older PVC-insulated cables already in my panel?
The vinyl backing and rubber adhesive are designed for standard electrical insulation up to 600 volts, so they adhere well to existing PVC jacketed conductors in typical residential or light commercial panels.
How can I verify the tape is performing correctly once I have wrapped a splice?
After wrapping, inspect for a tight, void-free seal with no exposed conductor; the UL 510 and CSA marks on the roll confirm the tape meets the 17 lb./in. tensile and 20 oz./in. adhesive specifications when applied properly.
Does the 66 ft roll include a dispenser or must I buy one separately?
The product is supplied as a continuous roll of Series 35 tape only; no dispenser, cutter or additional accessories are included in the package.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
