Schneider Electric
Schneider Electric ZB5AZ1014 Contact Block 22 mm Black 1NO
A 22 mm black contact block with one normally open circuit rated at 10 A, 250 V AC for Schneider ZB4 metal operators
- TypeIndustrial Electrical Controls & Automation
- Size22 mm
- 1NO momentary contact for reliable switching
- 10 A at 250 V AC rating handles demanding loads
- 22 mm mounting fits standard operator cut-outs
- Plug-in terminals speed up panel wiring
- Meets IEC 60947 and UL 508 standards
Industrial Contact Block
The Schneider Electric ZB5AZ1014 is a 22 mm industrial contact block designed for automation and control panels. It provides a single normally open circuit for momentary operator functions. The plug-in terminal connection allows quick installation on compatible Schneider ZB4 metal operators. This component suits engineers building or maintaining IEC-rated control systems.
Ratings and Standards
The block carries a 10 A rating at 250 V AC and meets NEMA A300/R300 designations. It complies with CSA C22.2 No. 14, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-4, JIS C8201-1, JIS C8201-5-1 and UL 508. These certifications confirm suitability for demanding industrial environments without requiring additional derating.
Sustained Operation
Under continuous load the contact maintains its rated 10 A capacity within the 250 V AC limit. The momentary action ensures the circuit closes only while the operator is actuated, reducing heat build-up during extended duty cycles. Plug-in terminals stay secure under vibration, supporting reliable performance in panels that run for long periods without interruption.
Highlights
- 1NO momentary contact for reliable switching
- 10 A at 250 V AC rating handles demanding loads
- 22 mm mounting fits standard operator cut-outs
- Plug-in terminals speed up panel wiring
- Meets IEC 60947 and UL 508 standards
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Size | 22 mm |
Questions about this item
How do I install the ZB5AZ1014 contact block into a 22 mm panel cut-out, and which step do installers often miss?
Snap the block onto the back of a compatible ZB4 metal operator until the plug-in connector latches; the step often missed is verifying the latch clicks fully so the 1NO circuit makes reliable contact.
What maintenance or replacement will the ZB5AZ1014 contact block need after extended service?
The block itself is sealed and requires no routine maintenance; replace the entire unit if the 10 A / 250 V AC contacts show wear or fail to meet the A300/R300 rating during periodic insulation-resistance checks.
What is the first electrical limit reached when the ZB5AZ1014 runs continuously at full load?
The 10 A continuous current rating at 250 V AC is the limiting factor; sustained operation above this value will cause contact overheating before any mechanical endurance limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
