Schneider Electric
Schneider Electric XAPG59505 pushbutton enclosure 12.2 in 5 holes NEMA 13 4
A die-cast aluminum pushbutton enclosure with five 22 mm holes, NEMA 13 and 4 ratings, 3/4 in conduit size, and 12.2 in height
- TypeIndustrial Electrical Controls & Automation
- Five 22 mm holes for multiple controls
- NEMA 13 and 4 rating resists oil, water and dust
- Die-cast aluminium body withstands industrial impact
- 2 in height fits standard panel layouts
- 3/4 in conduit entry simplifies wiring installation
Schneider Electric XAPG59505 pushbutton enclosure
This Schneider Electric XAPG59505 pushbutton enclosure is an industrial control housing designed for operators who need a compact, wall-mounted station. It provides five 22 mm cutouts arranged in a single vertical column for pushbuttons, selector switches or pilot lights. The die-cast aluminium body carries a NEMA 13 and 4 rating for protection against dust, oil and water ingress. Grey finish suits standard factory colour schemes.
Five-hole capacity and NEMA 13 4 headroom
Five 22 mm holes give room for a typical start-stop, emergency-stop and indicator-light cluster on a single panel. The 12.2 in height and 3.35 in width keep the footprint narrow for tight machine frames. Internal depth of 3.03 in and a contact-block depth of 2.93 in limit the length of rear-mounted components, so long-travel blocks or thick terminal strips may not fit. The 3/4 in conduit entry handles standard wiring but restricts cable-count or gland size.
NEMA 13 4 and 3/4 in conduit practical limits
NEMA 13 and 4 ratings cover indoor oil, coolant and wash-down environments but do not address corrosive atmospheres or hazardous-location requirements. The single 3/4 in conduit opening forces all cables through one raceway, which can complicate separation of power and signal circuits. Vertical mounting style fixes the enclosure orientation, so horizontal runs or angled operator stations need a different housing. RoHS compliance confirms restricted-substance adherence for regulated markets.
Highlights
- Five 22 mm holes for multiple controls
- NEMA 13 and 4 rating resists oil, water and dust
- Die-cast aluminium body withstands industrial impact
- 2 in height fits standard panel layouts
- 3/4 in conduit entry simplifies wiring installation
Specifications
| Brand | Schneider Electric |
|---|---|
| Type | Industrial Electrical Controls & Automation |
Questions about this item
Will the 22 mm holes accept standard 22 mm pushbuttons I already own?
Yes, each of the five holes is sized at 22 mm, matching the industry standard for 22 mm operators and contact blocks.
How can I confirm the enclosure meets its NEMA 13 and 4 ratings after installation?
Verify that the die-cast aluminum body, gasketed cover and 3/4 in conduit entry are properly sealed; the nameplate will show NEMA 13 and 4 compliance.
Does the box include mounting hardware or contact blocks, or must I buy them separately?
The enclosure ships as the empty die-cast aluminum housing only; mounting screws, pushbuttons, contact blocks and conduit fittings are purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
