Schneider Electric
Schneider Electric XAPG19201 pushbutton enclosure 22mm 1 hole die-cast zinc
A die-cast zinc pushbutton enclosure with one 22 mm hole, NEMA 4, 12 and 13 ratings, 3/4 in conduit size and 2.03 x 3.15 x 3.15 in dimensions
- TypeIndustrial Electrical Controls & Automation
- Die-cast zinc body resists impact and corrosion
- Single 22 mm cut-out fits standard push-button operators
- NEMA 4, 12 and 13 ratings protect against dust, water and oil
- Compact 2.03 x 3.15 x 3.15 in footprint saves panel space
- 93 in contact-block depth simplifies internal wiring
Schneider Electric XAPG19201 Enclosure
This Schneider Electric XAPG19201 enclosure is a die-cast zinc housing designed for industrial control panels. It accepts a single 22 mm pushbutton or pilot device, making it suitable for compact machine interfaces or auxiliary stations. The grey metal body provides NEMA 4, 12 and 13 rated protection against dust, water and oil ingress. It is built for electricians and panel builders who need a rugged, single-operator station.
One-hole capacity with 1.93 in contact depth
The enclosure fits exactly one 22 mm operator, so it handles simple start-stop or emergency-stop functions with no room for additional devices. Internal depth of 1.93 in accommodates standard contact blocks, but multi-block stacks or deep modules may not fit. The 3/4 in conduit entry allows straightforward wiring from one direction. Applications requiring multiple operators or larger legend plates will need a larger enclosure.
NEMA 4, 12, 13 die-cast zinc construction
The die-cast zinc housing delivers the structural strength and corrosion resistance required for NEMA 4, 12 and 13 environments, sealing out hose-directed water, circulating dust and coolant splashes. This rating is the deciding factor for outdoor or wash-down installations where plastic enclosures would not survive. If the application only demands NEMA 1 or 12, a lighter alternative could suffice.
Highlights
- Die-cast zinc body resists impact and corrosion
- Single 22 mm cut-out fits standard push-button operators
- NEMA 4, 12 and 13 ratings protect against dust, water and oil
- Compact 2.03 x 3.15 x 3.15 in footprint saves panel space
- 93 in contact-block depth simplifies internal wiring
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
Questions about this item
Will the 22 mm hole accept the 22 mm pushbuttons I already have?
Yes, the enclosure is drilled for a single 22 mm operator, matching standard 22 mm pushbuttons and pilot lights.
How can I verify the enclosure meets the NEMA 12, 13 and 4 ratings after installation?
Confirm the gasket seats evenly, the cover screws torque to the specified value and the 3/4 in conduit entry is sealed with a listed fitting.
Does the box include a contact block or mounting hardware, or must I buy them separately?
Only the die-cast zinc enclosure with 1.93 in contact-block depth is supplied; contact blocks, operators and conduit fittings are purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
