We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rack-mount UPS unit with LCD display and network card

Schneider Electric

Schneider Electric Smart-UPS SRT 3000VA RM 120V Network Card

SKU CH-HPRF-093NP

Provides 3000VA double-conversion online UPS protection with 120V input, 10/100 BaseT network management, LCD display, ECO and Green modes, cold-start capability, and power factor correction

  • Weight92.6
  • Reliable double-conversion online power protection for critical equipment
  • 10/100 BaseT network connection enables remote monitoring and management
  • ECO and Green modes bypass unused components for high operating efficiency
  • LCD graphics display shows operation modes, parameters and alarms clearly
  • Cold-start capability provides temporary battery power during utility outages

Double-conversion UPS for critical electronics

The Schneider Electric Smart-UPS SRT 3000VA RM 120V Network Card delivers high-density, double-conversion online power protection with scalable runtime for critical electronic equipment. It connects to the network using a 10/100 BaseT connection for remote management. The unit is designed for rack-mount installation in professional environments requiring continuous clean power.

ECO Mode and Green Mode efficiency

ECO Mode and Green Mode bypass unused electrical components during good power conditions to achieve high operating efficiency without compromising protection. Input power factor correction helps minimise installation costs by enabling the use of smaller generators and cabling. The LCD graphics display provides clear diagrams showing modes of operation, system parameters and alarms.

Cold-start and sustained battery operation

Cold-start capability supplies temporary battery power when utility power is out, ensuring clean, uninterrupted power to protected equipment when generator power is used. Double-conversion topology maintains continuous power conditioning during extended outages. Scalable runtime allows the system to match backup duration to load requirements.

Highlights

  • Reliable double-conversion online power protection for critical equipment
  • 10/100 BaseT network connection enables remote monitoring and management
  • ECO and Green modes bypass unused components for high operating efficiency
  • LCD graphics display shows operation modes, parameters and alarms clearly
  • Cold-start capability provides temporary battery power during utility outages

Specifications

BrandSchneider Electric
Weight92.6

Questions about this item

How do I install the network card and what step is often missed?

Connect the card to the 10/100 BaseT network port and configure the IP settings through the LCD graphics display; the step often missed is setting the network parameters on the display before assuming remote access works.

What maintenance or replacement will the UPS need later?

The internal batteries will require replacement after several years of service; the LCD graphics display will show a battery-replacement alarm when the runtime degrades below the level needed for your 3000VA load.

What limit appears first during sustained use?

Battery runtime is the first limit under continuous load; once the stored energy is depleted the UPS cannot maintain output until utility power returns or a generator starts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.