We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 11-pin DIN rail socket with screw terminals

Schneider Electric

Schneider Electric RXZE2S111M 11-pin DIN rail socket 10 A 250 V

SKU CH-VF33-2NGCG

An 11-pin DIN rail and surface-mount socket rated 10 A at 250 V with screw terminals and IP20 finger-safe protection

  • TypeSquare
  • Length3.400
  • ColorBlack
  • Weight0.13
  • 11-pin layout supports complex relay circuits
  • 10 A at 250 V rating handles demanding loads
  • DIN rail and surface mounting offers flexible installation
  • IP20 finger-safe terminals protect against accidental contact
  • Compatible with Harmony RXM series relays

Socket for Harmony RXM relays

This Schneider Electric 11-pin DIN rail socket accepts Harmony RXM series relays in a finger-safe elevator base. It mounts on DIN rail or a flat surface and carries 10 A at 250 V AC through screw terminals. The square black housing measures 3.400 in length with IP20 protection.

Replaces worn relay bases

Use this socket when an existing 11-pin base shows cracked insulation, loose screw terminals or corroded flat pins. The jump is worth it if the original base no longer holds the relay securely or fails to maintain IP20 finger protection. Do not choose this if you need a different pin count or a plug-in terminal style.

Simple rail or panel mounting

Clip the socket onto standard DIN rail or fasten it with screws through the surface-mount ears. Wire each of the 11 screw terminals to the flat pins, observing the 0.09 in pin width. Common issues include over-tightening screws on 10 A circuits and misaligning the relay in the elevator guide.

Highlights

  • 11-pin layout supports complex relay circuits
  • 10 A at 250 V rating handles demanding loads
  • DIN rail and surface mounting offers flexible installation
  • IP20 finger-safe terminals protect against accidental contact
  • Compatible with Harmony RXM series relays

Specifications

BrandSchneider Electric
ModelRXZE2S111M
TypeSquare
Length3.400
ColorBlack
Weight0.13

Questions about this item

What DIN rail width and surface-mount hole pattern does the Schneider Electric RXZE2S111M require?

The socket mounts on standard DIN rail and can also be surface mounted using its integral screw tabs; the square base measures 3.400 in on each side.

How do you install the RXZE2S111M on DIN rail, and which step is most often missed?

Clip the socket onto the rail until the latch clicks, then secure each of the 11 screw terminals to 10 A rated wire; the step most often missed is fully tightening every terminal screw to prevent loose connections.

What maintenance or replacement will the RXZE2S111M need over time?

Inspect the 11 screw terminals and IP20 finger-safe cover periodically for heat discoloration or corrosion; replace the socket if any terminal shows damage or if the relay it holds exceeds the 10 A @ 250 V AC rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.