Schneider Electric
Schneider Electric RXM3AB2F7 Relay 10 A 11 Pin 120V AC 3PDT
A 10 A 3PDT plug-in relay with an LED indicator, lockable push-to-test button and 11 flat pins for 120 V AC control circuits
- TypeIndustrial Electrical Controls & Automation
- ColorTransparent
- 10 A switching capacity handles demanding industrial loads
- 11 flat pins enable secure plug-in mounting on standard sockets
- LED status indicator plus mechanical flag provide instant visual confirmation
- Lockable push-to-test button allows safe circuit verification without tools
- Enclosed transparent housing protects contacts while allowing easy inspection
Purpose and fit
The Schneider Electric RXM3AB2F7 is a 11-pin plug-in relay rated for 10 A switching at 250 V AC or 28 V DC. It suits control panels and automation cabinets that need a 3PDT contact arrangement driven by a 120 V AC coil.
Interface limits
The 120 V AC coil requires a matching control voltage, and the 10 A contact rating sets the maximum load current for both AC and DC circuits. Quick-connect flat pins 0.09 in wide dictate the socket or terminal block choice, so existing wiring must accept that pin geometry.
Build and daily use
The enclosed transparent body measures 1.57 in deep by 1.06 in high and carries an LED status indicator plus a lockable push-to-test mechanical flag. Plug-in mounting allows fast replacement without tools, while the sealed housing protects contacts from dust in industrial environments.
Highlights
- 10 A switching capacity handles demanding industrial loads
- 11 flat pins enable secure plug-in mounting on standard sockets
- LED status indicator plus mechanical flag provide instant visual confirmation
- Lockable push-to-test button allows safe circuit verification without tools
- Enclosed transparent housing protects contacts while allowing easy inspection
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color | Transparent |
Questions about this item
Should I pick this 10 A 3PDT relay or a lower-current version for my control circuit?
Choose this relay when the load draws up to 10 A at 250 V AC or 28 V DC; a lower-rated model would not handle that current.
What does the 10 A contact rating mean when the relay is installed in a panel?
It means each of the three pole sets can switch a continuous 10 A resistive load at 250 V AC or 28 V DC without exceeding the relay's thermal limits.
The relay uses 11 flat pins at 0.09 in width — what socket standard does that match?
The 11 flat pins at 0.09 in pitch fit standard 11-pin octal sockets used for plug-in industrial relays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
