We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric RXM2AB1B7 8-pin plug-in relay, square base, mechanical flag indicator

Schneider Electric

Schneider Electric RXM2AB1B7 8-Pin Plug-In Relay 24V AC

SKU CH-FB7D-YYJP5

A general-purpose plug-in relay with an 8-pin square base, 24 V AC coil, DPDT contacts rated 12 A at 277 V AC or 28 V DC, mechanical flag indicator and lockable push-to-test button

  • TypeMiniature Plug In, Mechanical Indicator
  • Plug-in 8-pin base simplifies installation
  • 24 V AC coil suits standard control circuits
  • DPDT contacts switch 12 A at 277 V AC
  • Mechanical flag shows relay status at a glance
  • Push-to-test button enables quick circuit verification

Miniature 8-Pin Plug-In Relay

The Schneider Electric RXM2AB1B7 is a general-purpose plug-in relay designed for control-panel and automation tasks. It operates on a 24V AC coil and provides DPDT switching with silver-nickel contacts rated for 12A at 277V AC or 28V DC. The square 8-pin base fits standard relay sockets for quick installation.

Mechanical Indicator and Lockable Test

A mechanical flag indicator shows contact status at a glance without needing auxiliary power. The push-to-test button is lockable, allowing technicians to hold contacts in the operated position during commissioning or troubleshooting. These features reduce diagnostic time and simplify maintenance on live panels.

Coil Power and Contact Limits

The coil consumes 1.2 VA, a figure that determines the control-transformer sizing and the number of relays a single supply can drive. Contacts are rated for resistive loads up to the stated voltages and currents; inductive or inrush-heavy loads will reduce achievable switching cycles. The plug-in mounting relies on a matching socket, so panel layout must accommodate the socket footprint and wiring access.

Highlights

  • Plug-in 8-pin base simplifies installation
  • 24 V AC coil suits standard control circuits
  • DPDT contacts switch 12 A at 277 V AC
  • Mechanical flag shows relay status at a glance
  • Push-to-test button enables quick circuit verification

Specifications

BrandSchneider Electric
ModelRXM2AB1B7
TypeMiniature Plug In, Mechanical Indicator

Questions about this item

How often should the silver-nickel contacts on this DPDT relay be inspected or replaced under normal load?

The silver-nickel contacts are rated for 12 A at 277 V AC or 28 V DC; inspect them during routine panel maintenance and replace if pitting or excessive wear appears.

What thermal or current limit will be reached first when this relay runs continuously at its 12 A rating?

Continuous operation at 12 A is the primary limit; the coil draws 1.2 VA at 24 V AC, so contact current capacity defines the sustained-use boundary.

How much heat does the coil generate and is there any audible noise when the relay stays energised all day?

Coil power consumption is 1.2 VA at 24 V AC, producing modest heat; the mechanical flag indicator operates silently with no fan or moving parts beyond the contact armature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.