Schneider Electric
Schneider Electric RPM41BD 4PDT 15 A 24 V DC 14-pin relay
A 14-pin plug-in relay with 4PDT contacts rated at 15 A for 24 V DC coils and 250 V AC switching
- TypeIndustrial Electrical Controls & Automation
- ColorTransparent
- Plug-in mounting enables quick installation in standard 14-pin sockets
- Four-pole double-throw contacts switch multiple circuits with one coil
- Mechanical flag indicator shows relay status at a glance
- Lockable push-to-test button allows safe manual operation
- 15 A rating at 250 V AC and 28 V DC handles demanding loads
Schneider Electric 4PDT 15 A 24 V DC Relay
This Schneider Electric RPM41BD relay is a general-purpose plug-in device with a 24 V DC coil and 14 flat pins. It switches up to 15 A at 250 V AC or 28 V DC through four changeover contacts. A mechanical flag provides visual status indication and the lockable push-to-test button allows manual circuit verification. The enclosed transparent body measures 1.61 in wide, 1.54 in deep and 1.06 in high.
Suited for control panels needing four isolated
Engineers wiring motor starters, lighting banks or safety interlocks will find the 4PDT configuration and 15 A rating fit standard industrial loads. The quick-connect flat pins simplify socket installation and maintenance. Buyers who need higher voltage switching, different coil voltages or unsealed construction should look at other models.
The 4PDT contact form decides suitability
Four-pole double-throw contacts give two distinct circuits per pole, letting one coil control four separate loads. If the design calls for fewer poles, a different contact form is required. The 15 A rating at 250 V AC and 28 V DC sets the hard limit for connected equipment.
Highlights
- Plug-in mounting enables quick installation in standard 14-pin sockets
- Four-pole double-throw contacts switch multiple circuits with one coil
- Mechanical flag indicator shows relay status at a glance
- Lockable push-to-test button allows safe manual operation
- 15 A rating at 250 V AC and 28 V DC handles demanding loads
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color | Transparent |
Questions about this item
What does the 24 V DC coil voltage mean for the relay's operation?
The 24 V DC coil energises the relay, allowing the 4PDT contacts to switch loads up to 15 A at 250 V AC or 28 V DC.
Which socket or base accepts the 14 flat pins on this relay?
A standard 14-pin square plug-in socket with 0.18 in flat-pin spacing matches the relay's pin layout and body width of 1.61 in.
How do I use the lockable push-to-test button without leaving the contacts actuated?
Press the button to test the circuit, then rotate it to the unlocked position so the mechanical flag returns and the contacts resume normal operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
