We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent square enclosed power relay with DIN rail and top flange mounting, eight flat pin terminals visible

Schneider Electric

Schneider Electric RPF2BF7 Enclosed Power Relay 30A 120V AC DPDT Square Mount

SKU CH-FD45-MZSQM

Enclosed power relay with DPDT contacts rated 30 A at 120 V AC, DIN rail and top-flange mount, sealed housing and ¼ in tab terminals

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable switching for 30 A AC loads
  • Handles 20 A DC at 28 V for battery circuits
  • Sealed enclosure protects contacts from dust and moisture
  • Mounts on DIN rail or top flange for flexible installation
  • 1 hp at 120 V AC and 3 hp at 240 V AC motor ratings

Enclosed Power Relay 30 A 120 V AC

The Schneider Electric RPF2BF7 is an enclosed power relay rated for 30 A at 120 V AC with a DPDT contact form. It uses a 120 V AC coil and mounts via DIN rail and top flange for industrial control panels. The unit has eight 0.25 in tab terminals and a transparent sealed housing.

Sustained Load Behaviour

Under continuous operation the relay handles 30 A at 250/277 V AC on the normally open contacts and 3 A on the normally closed contacts. DC ratings reach 25 A at 28 V on the normally open side and 3 A on the normally closed side. Motor loads are rated at 1 hp at 120 V AC and 3 hp at 240 V AC.

Thermals Noise and Power Draw

The sealed enclosure protects internal contacts from dust and moisture without a status indicator or push-to-test button. No active cooling is required and the relay operates silently during normal switching. Power consumption is limited to the 120 V AC coil draw during actuation.

Highlights

  • Reliable switching for 30 A AC loads
  • Handles 20 A DC at 28 V for battery circuits
  • Sealed enclosure protects contacts from dust and moisture
  • Mounts on DIN rail or top flange for flexible installation
  • 1 hp at 120 V AC and 3 hp at 240 V AC motor ratings

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How much heat does the RPF2BF7 relay generate when running continuously at 30 A?

The sealed enclosure has no fan or status indicator; heat dissipation depends on the 0.25 in tab terminals and the DIN rail mounting surface you provide.

What wiring and mounting hardware must I already have to install this relay?

You need 1/4 in tab terminals for the 8 flat pins, a DIN rail or top-flange panel cut-out, and a 120 V AC coil supply.

Will the RPF2BF7 switch the same loads as the older 20 A relay I am replacing?

This unit carries 30 A at 250/277 V AC on the normally-open contacts and 25 A at 28 V DC, both higher than a 20 A predecessor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.