Schneider Electric
Schneider Electric Miniature Circuit Breaker 6A Z Curve 1 Pole
A 6 A, Z-curve miniature circuit breaker providing single-pole overcurrent protection for sensitive equipment
- TypeCircuit Breakers
- 6 A rated current protects low-power circuits
- Z-curve tripping suits loads with high inrush
- Single-pole design fits standard DIN rail spaces
- Schneider Electric manufacture ensures consistent quality
- First listed by manufacturer January 30 2020
6 A Z-Curve Single-Pole Breaker
This Schneider Electric miniature circuit breaker carries a 6 A rating with a Z-type tripping curve in a single-pole housing. It is designed for branch-circuit protection where very low magnetic-trip thresholds are required. The device is supplied new and was first listed by the manufacturer on 30 January 2020.
For circuits needing fast magnetic response
Installations that demand rapid disconnection under low-level fault currents will match the Z-curve characteristic. Circuits with high inrush currents or those requiring standard B or C curves should look at alternative breakers.
Z-curve tripping characteristic
The defining specification is the Z-type curve, which initiates magnetic tripping at a lower multiple of rated current than standard curves. This single parameter determines whether the breaker suits the intended load profile.
Highlights
- 6 A rated current protects low-power circuits
- Z-curve tripping suits loads with high inrush
- Single-pole design fits standard DIN rail spaces
- Schneider Electric manufacture ensures consistent quality
- First listed by manufacturer January 30 2020
Specifications
| Brand | Schneider Electric |
|---|---|
| Type | Circuit Breakers |
Questions about this item
What electrical supply do I need so this 6 A Z-curve breaker can operate?
It is rated for a 6 amp circuit; the supply must not exceed that current.
Can I keep my existing busbar when adding this single-pole breaker?
Yes, the single-pole design fits alongside other poles on the same busbar.
How do I verify the breaker trips correctly after installation?
Switch the toggle to ON, apply load up to 6 A, then confirm it interrupts on overload.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
