We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent miniature contactor, DIN-rail mount, screw terminals, 2.28 by 3.54 inches

Schneider Electric

Schneider Electric LP2K0901BD 3-Pole 24V DC 9A Contactor

SKU CH-JC68-BC9T9

A 3-pole IEC miniature magnetic contactor rated 9 A inductive and 20 A resistive at 24 V DC with 1 NC auxiliary contact and screw-clamp terminals for DIN-rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 3-pole switching for motor control
  • 24 V DC coil suits low-voltage panels
  • 9 A inductive rating handles typical loads
  • 20 A resistive capacity for heating circuits
  • DIN-rail and plate mounting fits standard enclosures

Schneider Electric LP2K0901BD 3-Pole Contactor

This Schneider Electric LP2K0901BD is a miniature IEC magnetic contactor designed for industrial electrical control and automation. It features a 24V DC coil voltage and three poles rated for 9A inductive and 20A resistive loads. The unit mounts on DIN rail or plate and uses screw clamp terminals for secure connections.

Suitable for compact motor switching

This contactor suits builders assembling space-constrained control circuits requiring a single normally-closed auxiliary contact and reversing capability. It is not for applications needing a NEMA-rated enclosure, higher current ratings beyond 9A inductive, or a different coil voltage than the specified 24V DC supply.

Key specification is the 9A inductive current rating

The 9A inductive full-load current at three poles determines whether this TeSys K series contactor matches the load requirements. Verify the 24V DC coil voltage and screw clamp terminal style align with the control circuit design before installation.

Highlights

  • 3-pole switching for motor control
  • 24 V DC coil suits low-voltage panels
  • 9 A inductive rating handles typical loads
  • 20 A resistive capacity for heating circuits
  • DIN-rail and plate mounting fits standard enclosures

Specifications

BrandSchneider Electric
ModelLP2K0901BD
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How does the 9 A inductive rating translate to actual motor or load switching in a cabinet?

The contactor is rated for 9 A full-load inductive current at 24 V DC coil voltage, suitable for small motor or control-circuit switching within that limit.

What does the screw-clamp terminal interface mean for wiring and what current does it cap?

Screw-clamp terminals accept solid or stranded conductors and the contactor's resistive rating caps at 20 A, so wiring must be sized for the intended load up to that value.

What mounting options and clearances does the 2.28 in by 3.54 in body need on a DIN rail or plate?

The unit mounts on standard DIN rail or directly on a plate; its 2.28 in height and 3.54 in width define the footprint, so allow space for wiring access and adjacent devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.