We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small transparent rectangular contactor with screw terminals

Schneider Electric

Schneider Electric LP1K0910BD IEC Miniature Magnetic Contactor 24V DC 1NO 3P

SKU CH-893X-9YNW9

IEC miniature magnetic contactor rated 24 V DC with one normally open auxiliary contact and three power poles for motor control up to 440 V

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Wide temperature operation from -13 to 122°F
  • 24V DC coil with 0.8 to 1.15 Uc operational range
  • 1NO auxiliary contact for control circuit integration
  • Up to 1.3 Mcycles AC-3 electrical durability at 440V
  • Screw clamp terminals accept various wire sizes

IEC Miniature Magnetic Contactor 24V DC

This Schneider Electric contactor is built for motor control and resistive load applications in industrial electrical systems. It operates on a 24V DC coil voltage and provides a single normally open auxiliary contact. The unit is rated for operational ambient temperatures between -13°F and 122°F.

Suited for low-voltage control panels needing

It fits installations requiring a miniature IEC contactor with screw clamp terminals and defined coil operating limits between 0.8 and 1.15 Uc. Buyers needing multiple auxiliary contacts or higher coil voltages should consider other models.

Rated for 1.3 million cycles at AC-3 440V

Electrical durability reaches 1.3 Mcycles at AC-3 up to 440V and 0.16 Mcycles at AC-1 up to 690V. Fuse compatibility covers 25A gG for power circuits and 10A gG for signalling circuits per IEC60947. Cycle life drops significantly under AC-1 resistive loads.

Highlights

  • Wide temperature operation from -13 to 122°F
  • 24V DC coil with 0.8 to 1.15 Uc operational range
  • 1NO auxiliary contact for control circuit integration
  • Up to 1.3 Mcycles AC-3 electrical durability at 440V
  • Screw clamp terminals accept various wire sizes

Specifications

BrandSQUARE D
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What control-circuit voltage must my system supply for the 24V DC coil to operate reliably?

The coil is rated for 24V DC and will pull in between 0.8 and 1.15 times that voltage at 50°C, dropping out between 0.1 and 0.75 times rated voltage.

Can I keep my existing 440 V power wiring and protection when fitting this contactor?

Yes, the power circuit is rated up to 440 V and the associated fuse rating allows up to 25 A gG at that voltage per IEC 60947 and VDE 0660.

How do I verify the auxiliary contact is switching correctly after installation?

The contactor includes one normally open instantaneous auxiliary contact; apply the 24V DC coil voltage and confirm continuity across the auxiliary terminals when the main contacts close.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.