We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric LP1K0601BD 24V DC 6A 3-pole contactor, transparent housing, DIN rail mount

Schneider Electric

Schneider Electric LP1K0601BD 24V DC 6A 3-Pole Contactor

SKU CH-A2RP-B1PRP

Three-pole IEC contactor with 24 V DC coil, 6 A inductive rating and screw-clamp terminals for DIN-rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 24V DC coil for low-voltage control panels
  • 6A inductive rating handles motor-starting loads
  • Three-pole switching in a 1.77 in wide IEC frame
  • DIN-rail or plate mounting fits standard enclosures
  • 690V AC maximum rating suits industrial power circuits

IEC Magnetic Contactor

The Schneider Electric LP1K0601BD is a three-pole IEC magnetic contactor designed for switching inductive loads up to 6 A. It operates from a 24 V DC coil and mounts on a DIN rail or plate for panel integration.

Coil and Voltage Limits

The 24 V DC coil voltage defines the control circuit requirement, while the 690 V AC maximum rating sets the upper bound for the power circuit. The contactor has no embedded surge suppressor, so external protection may be needed for inductive switching transients.

Screw Clamp Installation

Screw clamp terminals accept wire connections secured by tightening screws, a standard method for panel wiring. The compact 2.28 in height and 1.77 in width allow dense DIN rail layouts, though installers must verify clearance for the 1 NC auxiliary contact block.

Highlights

  • 24V DC coil for low-voltage control panels
  • 6A inductive rating handles motor-starting loads
  • Three-pole switching in a 1.77 in wide IEC frame
  • DIN-rail or plate mounting fits standard enclosures
  • 690V AC maximum rating suits industrial power circuits

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I select the 24 V DC coil or a different voltage for my control circuit?

Choose the 24 V DC coil when your control circuit runs on 24 V DC; other coil voltages are separate part numbers not covered by this LP1K0601BD.

What does the 6 A inductive rating mean once the contactor is installed in a motor starter?

It means the three main poles can switch a 6 A inductive load such as a small motor at up to 690 V AC without exceeding the rated thermal current.

How does the screw-clamp terminal interface limit the wire size I can use?

The screw-clamp terminals accept solid or stranded conductors up to the maximum cross-section defined in the TeSys K datasheet; strip length and tightening torque must follow that datasheet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.